User Manual

Iridium Communications, Inc. Information Contained in this Guide
Iridium 9523 Product Developers’ Guide is Subject to Change Without Notice
Revision 2.6
Iridium Communications, Inc. Distribution of Guide Restricted
Proprietary & Confidential Information Page 56 of 115 to Product Developers
Only
Read command returns the current message service type set. Response is in the form:
+CSMS: <service>,<mt>,<mo>,<bm>
Test Command: +CSMS=?
Test command returns the supported message services of the phone. Response is in the form:
+CSMS: (list of supported <service>s)
5.7.55 +CSTA - Select Type of Address
Set Command: +CSTA=[<type>]
Select the type of number for the dial command D. <type> is the type of address in integer format
specified in GSM 4.08 subclause 10.5.4.7. Typical values for <type> are:
129 Unknown type (default)
145 International number
Read Command: +CSTA?
Query the current address type settings. The response is in the form:
+CSTA: <type>
Test Command: +CSTA=?
List the supported address type settings. The response is in the form:
+CSTA: (supported <type>s)
5.7.56 +GMI - Manufacturer Identification
Exec Command: +GMI
Query phone manufacturer. This command is similar to +CGMI.
5.7.57 +GMM - Model Identification
Exec Command: +GMM
Query phone model. This command is similar to +CGMM.
5.7.58 +GMR - Revision
Exec Command: +GMR
Query the phone revision. This command is similar to +CGMR.
5.7.59 +GSN - Serial Number
Exec Command: +GSN
Query the phone IMEI. This command is similar to +CGSN.
5.7.60 +GCAP - General Capabilities
Exec Command: +GCAP
Query the phone’s overall capabilities.