User's Manual

Iridium Satellite LLC
9601 SBD Transceiver Preliminary Product Developers Guide
V1.2 082905
Iridium Satellite LLC Proprietary & Confidential Information
Information contained herein is preliminary and subject to change without further notice
12
2.2.2 Mounting to a Panel/Surface –For use with cable connections
An example of mounting to a panel or other surface design is shown in Figure 6.
Figure 6: 9601 Transceiver mounted to a plate or surface.
The figures and tables below provide mechanical information design information for a mounting a 9601 to
a plate or surface configuration
Figure 7: Assembly Item Number Identification.
Item Numbers in Figure 7 are described in Table 4. (Not to scale. Dimensions in millimeters.)
Notes for Figure 7:
1. Item 1 includes 4 off M3 x 20 shipping screws, shake-proof washers and nuts
2. Shipping screws can be used to attach Transceiver to panel of 2.00 mm maximum thickness
3. Panels thicker than 2.00mm require longer screws to be e.g. M3 x 25mm
4. See Figure 8 for mounting hole dimensions