English Sheedfed Scanner Getting Started
Trademarks Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows and Vista are trademarks of Microsoft Corporation. IBM, IBM PC are registered trademarks of International Business Machines Corp. ENERGY STAR® is a U.S. registered mark. Other brands and product names herein are trademarks or registered trademarks of their respective holders. Copyright All rights reserved.
System Requirements ¾ IBM compatible PC 586, Pentium or higher ¾ Microsoft Windows 2000, Windows XP, Windows Vista ¾ USB port 2.0 (compatible with USB 1.
Table of Contents 1. Introduction.............................................. 1-1 2. Scanner Installation.................................. 2-1 2.1 2.2 3. Installation and Disassembly of the Scan Module ..................................................... 2-1 Installing the Scanner Driver and Cables ....... 2-3 Completing Your First Scan ....................... 3-1 3.1 3.2 Placing Your Document ............................... 3-1 Verifying Your Scanner Installation ............... 3-7 4.
1. Introduction Congratulations on your purchase of the color image scanner. With this scanner, you can quickly scan documents to increase productivity. Before you install and operate the new scanner, please take a few minutes to read through this manual. It provides proper instructions for you to unpack, install, operate and maintain the scanner. The following figure indicates the package contents. Please check all the items against your checklist.
1 2 4 3 5 1. 2. 3. 4. 5. Scanner main unit Quick guide/CD USB cable USB power cable Power adapter Note: 1. Only use the AC adapter included in the machine. Using other AC adapters may damage the machine and void the warranty. 2. Please unpack the packing carefully, and check the contents against the checklist. If any items are missing or damaged, please contact your dealer immediately.
2. Scanner Installation 2.1 Installation and Disassembly of the Scan Module Installation Steps Align the scan module to the document feeder and insert it on the document feeder. If it has been inserted successfully, a snap in sound could be heard.
The scan module is detachable from the automatic document feeder. The scan module without the automatic document feeder can be conveniently carried around. Disassembly Steps: Press the release button on bottom right corner and lift up the scan module. The scan module can be easily removed. The scan module Note: Before installing the scan module to the auto document feeder, please first remove the protection cushion both inside and outside the scan module.
2.2 Installing the Scanner Driver and Cables Note: 1. The Windows system CD may be required when installing on some PC’s. 2. To ensure your computer can identify the USB scanner, please install scanner driver first before connecting the scanner to your computer. 3. If you wish to uninstall your scanner driver, please keep your scanner connecting to the computer. 2.2.1 Connecting to Power There are two ways of supplying power to the scanner.
(2) Supplying the power from a computer via a USB power cable Plug the circle end of the USB cable for power into the power jack of your scanner. Connect the rectangle end to the USB port of your computer. Notice: Using the USB cable for power will occupy an extra USB port on your computer. Due to the power limit, the scan speed is lower by using the USB cable for power than by the power adaptor.
2.2.2 Turning on the Scanner Turn the knob on the scanner clockwise to make the pointer points to any number to turn on the scanner. The green LED will be on. Note: Each of the number marks (1, 2, 3, 4, 5, 6) corresponds to its respective destination in the Button Manager application. Please refer to Chapter 5 for more details. In this section, any of them can also represent the “power on” status.
2.2.3 Turning off the Scanner To turn off the scanner, turn the knob to make the blue pointer points to the power off mark as indicated below. 2.2.4 Installing the Scanner Driver 1. Place the supplied CD-ROM onto your CD-ROM drive. 2. The software installation graphic appears. If not, run “setup.exe”.
Contents on the installation graphic: 3. • Install Button Manager: To use the buttons on the scanner, you need to install Button Manager. To ensure Button Manager works properly, please FIRST install Button Manager before installing the scanner driver. • Install Scanner Driver: To communicate with your scanner, you need to install the scanner driver. After installing the Button Manager software, click Install Scanner Driver to install the scanner driver on your computer.
2.2.5 Connecting to Computer 1. Connect the square end of the USB cable to the USB port of your scanner. Connect the rectangle end to the USB port of your computer. 2. The computer should detect a new USB device and prompt a “New Hardware Found” message. 3. In Windows 2000, confirms that the “Search for a better driver.” is selected and click the “Next” button. In Windows Vista, click the Recommended option, and then click Continue button to complete the installation. 4.
3. 3.1 Completing Your First Scan Placing Your Document 3.1.1 Notice on Using the ADF Before using the ADF, please make sure that your paper meets the following specifications: • Document(s) can range in size from 3.5 by 2 inches to 8.5 by 14 inches (Legal). • Document(s) can range in weight from 16 to 28 lbs • Document(s) should be square or rectangular and in good condition (not fragile or worn). • Document(s) should be free of curl, wrinkle, tears, wet ink, or punch holes.
3.1.2 Loading Paper to the Document Feeder 1. Pull out the output tray beneath the bottom of the scanner as indicated below.
2. 3. Load your one side document(s) to the document feeder with the top of the page pointing to the feeder. • The document feeder can hold up to 20 sheets (at Xerox 4024 20 lb. paper). • Place your one side document with the text facing down and the first page loading first. • Place your double side document with the first page inserting first. Adjust the paper guides in the document feeder so they touch both sides of the page.
3.1.3 Loading A Single Page Through the Front Input Tray 1. Open the cover of the front input tray. 2. Load your singe-page document to the front input tray with the top of the page pointing to the front input tray. Load one side document with the text facing down.
3. Center your document with the paper size marks.
3.1.4 Using the Function of “Eject Paper Opposite” The scanner is designed with the advanced “eject paper opposite” feature to achieve the fastest scan rate. By default, the paper which feeds through the scanner will be ejected from the front side of the front tray. You can select “eject paper opposite” on Setting tab of the TWAIN user interface (Scanner Properties dialog box) to let the paper be ejected from the opposite side of the front tray.
3.2 Verifying Your Scanner Installation To verify if your scanner installation is correct, I.R.I.S. provides you a useful test program called I.R.I.S. Capture Tool. With this tool, you can perform simple scans and view the captured images. In addition, it helps you complete your scan at a rated speed. The following procedure describes how to verify your scanner installation.
Fit Actual Page Size Setup Scan File Format Save File Path 3. Choose your desired file format from the File Format drop down list box. (Default is BMP, other choice includes TIFF, GIF, and JPEG.) 4. Type your desired folder name and file name in the File Path box. (Default is C:\My Scan\Image.) Note: If you do not wish to save the scanned image, deselect the Save button since default is Save Enable. In this case, the thumbnail view will be disabled.
Image Selection Box 6. From the Image Selection Box, choose your desired image type for your scanned image. (Default is Front B&W) If you have a duplex scanner, choose Front and Rear to scan both sides of your document. 7. Click OK to quit the Scanner Properties dialog box. (To learn more details about the Scanner Properties dialog box, please see the subsequent chapter, Using the Scanner Properties Dialog Box.) 8.
Fit Page View Thumbnail View 11. You can view the scanned image in Fit Page ( Actual Size (100%) button ( at the right side. ) or ) from the Viewing toolbars 12. Click the Close box or Quit from the File menu to exit the Scan Validation Tool.
3.1.5 A Glance of the Scanner Properties Dialog Box 1 2 3 4 5 6 7 8 1. Tab Options Choice: Image, Compression, Color Dropout, Paper, Options, Settings, Information. 2. Image Choose your image type and the side of Selection Box document you wish to scan. Options vary based on type of scanner. 3. Brightness: Adjust the brightness level from –100 to +100. 4. Contrast Adjust the contrast level from –100 to +100. Determine the quality of the scanned image. 5. Resolution The industry standard is 200 dpi. 6.
4. The ISIS Interface Operation The ISIS driver operation method is similar to the TWAIN’s functions on the ISIS interface screen is briefly described as below: Mode: Select one of scan modes, including B&W, gray, color options. Dither: 5 halftone levels available, can be disabled. Dots per inch: Select your desired resolution. Paper Size: Select your desired paper size. Brightness: Adjust your scan image brightness or darkness.
5.
5.1 Installing Button Manager To use the buttons on the scanner, you need to install the Button Manager. To ensure the Button Manager work properly, please FIRST install Button Manager before installing the scanner driver. Installing the Button Manager is easy. Insert the supplied CD to your CD-ROM drive and follow the instructions on the screen to complete the installation of the Button Manager.
3. The Button Panel shows the first five scanning buttons. Right-click the button (function) you wish to check. The Button Properties window appears. Click to select options or setting. The button number and name. The scan settings for the selected button. (in this case button #1). The file format of the scanned image. (*The options vary based on type of scanner.) The destination application. (This is the application that opens after you have finished scanning.
5.3 Scanning From One Touch of the Buttons 1. Adjust the paper guide for the width of paper and load the document with their tops into the input tray. 2. Turn the knob on the scanner to select one of the number marks (1, 2, 3, 4, 5, 6). (For example, if you want to scan with button #4, which opens Microsoft Paint and displays the scanned image in the main window of Microsoft Paint, turn the knob to select the number mark, 4.) 3. Press the Scan button on scanner. 4.
6. Care and Maintenance 6.1 Cleaning the Scanner Glass Both strips of glass in the scanner should be cleaned periodically. The two small strips of gray reflective material should lightly dusted if debris is present. To clean the strips of glass, follow these steps: 1. Pull the release knob to open the front door. 2. Clean two pieces of glass by using a soft and lint-free cloth wet with some isopropyl alcohol. (95%).
Scanner glass 3. Close the front door.
6.2 Cleaning the Rollers and ADF Pad From time to time the pad assembly and feeding rollers may become contaminated with ink, toner particles or paper dust. In this case the scanner may not feed documents smoothly. If this occurs, please clean the rollers and ADF pad. To clean the feeding rollers, 1. Pull the release knob to open the front door. 2. Clean the feeding roller by using a soft, lint-free cloth wet with some isopropyl alcohol. (95%). While cleaning the rollers, avoid touching the sensor arm.
To clean the ADF roller and pad assembly, 1. Pull the release knob to open the front door. 2. Press down the document feeder. 3. Press down two latches on the back of the automatic document feeder to open the rear cover. 4. Clean the ADF roller and ADF pad by using a soft and lintfree cloth wet with some isopropyl alcohol (95%). When cleaning the ADF pad, avoid touching the metal part.
7. Troubleshooting 7.1 Clearing a Paper Jam In the event of a paper jam, follow the procedures below to remove the paper: 1. Pull the release knob to open the front door.
2. Press down two latches in the back of the automatic document feeder to open the rear cover. 3. Carefully pull the paper out of the document feeder.
8. Specifications All specifications are subject to change without notice. Scanner Type Sheet-fed, duplex scanner Optical Resolution 600 x 600 dpi Maximum Scanning Size 8.5”x14” Interface High Speed USB 2.0 Bus Power/ External Adapter 5Vdc,1A / 24Vdc,1A Power Consumption < 12 watts (operation) < 5 watts (standby) Operation Temperature 10~35°C Storage Temperature -40 to 65°C Dimension Without ADF (W*D*H) 297 mm x 80 mm x 60 mm With ADF (W*D*H) 297 mm x 158 mm x 235 mm Weight 1.
