User manual

24
User Guide – IRIScan
TM
Executive 4
Blank Page
Removal
Check if you wish to remove the blank page and move the slider to the
left or right to your desired threshold.
Edge Fill
Check White or Black if you wish to add white or black edge on the border of
your scanned image. Enter the value from 0 to 5 mm. Default value is 0.
Original
Edge Fill: 5mm (Black)
Image
Control
Option
Check the Mirror box if you wish to reverse the right and left side of your
image.
Original The Mirror Effect
Punch
Hole
Removal
You can remove punch holes from the output scanned image when scanning
punched document. Note the availability of this feature varies depending on your
scanner model.
Punch holes can not be removed when:
 Resolution is set lower than 150dpi
 The hole is near the edge of the document
 The holes are not aligned along the edge of the document
 Punch Hole Removal is available only when “Auto Crop” is enabled. If either
“Fixed to Transport”, “EOP (End of Page) Detection”, “Automatic Multiple”,
“Relative to Documents” is selected from the Cropping option on the Paper tab,
the Punch Hole Removal option will be disabled.
Original
Output image