User manual

User Guide – IRIScan

Executive 4

2. Using the Scanner Properties Dialog Box (Setup)

In this chapter we provide an overview of the Scanner Properties dialog box (Setup).

The Scanner Properties dialog box allows you to configure the scanner’s settings. It consists of several

tabbed windows each of which will be described in this chapter.

Note:

In this chapter, all options are described based on a duplex (double-side) scanner. If you have purchased a

simplex (single-side) scanner, not all options will be available.

2.1 A Glance at the Scanner Properties Dialog Box

1. Tab Options

Choice: Image, Compression (PC), Color Dropout, Paper, Preview (PC),

Rotation, Separation, Enhancement, Settings, Imprinter, Information.

Note: by default only 4 tabs are shown. To add extra tabs, click the Settings

tab and then select the tabs you want to add.

2. Image

Selection Box

Choose your image type and the side of document you wish to scan. Options

vary based on type of scanner.

3. Brightness

Adjust the brightness level from –100 to +100.

4. Contrast

Adjust the contrast level from –100 to +100.

5. Resolution

Determine the quality of the scanned image. The industry standard is 300 dpi.

6. Invert

Reverse the color of your scanned image.

7. Scan Source

Choice: Auto Document Feeder

8. Defaults

Reset all values on the tabs to the factory default settings.