USA Inc. Modem User Manual

Coaxial Networks, Inc. Page 38 of 60
-------------------------------------------------------------------------------
00:0b:00:02:01:0a 0x0002
00:0b:06:9f:a7:fe 0x0002
00:10:5a:d0:1d:cd 0x0001
00:10:95:1b:e1:c5 0x0001
00:10:b5:3e:56:a2 0x0002
00:30:eb:bc:0c:a5 0x0004
00:90:83:8c:58:23 0x0003
00:e0:ca:00:c1:9c 0x0005
ff:ff:ff:ff:ff:ff 0x16383
Total:(9)
Figure 23 List of SID and their MAC addresses
“pcpe” command
The “pcpe” command displays you a list of MAC addresses of cable modems that have
communicated to IRIS, their SID (service identifier) and the current registered state. It also
displays the MAC addresses of the CPE’s connected to each registers cable modems.
IRIS>pcpe
Registered CMs
-------------------------------------------------------------------------------
MAC PSID USID STATUS
-------------------------------------------------------------------------------
00:0b:06:9f:a7:fe 0x0002 0x01 Yes
00:0b:00:02:01:0a
00:10:b5:3e:56:a2
00:10:95:1b:e1:c5 0x0001 0x01 Yes
00:10:5a:d0:1d:cd
00:30:eb:bc:0c:a5 0x0004 0x01 Yes
00:90:83:8c:58:23 0x0003 0x01 Yes
00:e0:ca:00:c1:9c 0x0005 0x01 Yes
Total(5), Yes(5) No(0)
Unsubscribed CMs
-------------------------------------------------------------------------------
Total(0)
Figure 24 List of CPEs connected to the CMs
“config_cm” command
The “config_cm” is used to compile and create cable modem configuration file that the cable
modems download from IRIS during the registration process. The cable modem configuration file
has important operational parameters including the data rates that the cable modem will be using
for upstream and downstream traffic.
The cable modem configuration files should be located in the “/tftpboot” directory after
compilation and the “/etc/dhcpd.conf” specifies the name of the configuration file to the
cable modem during it downloads IP parameters from the Dhcp server.
“count” command