Operation Manual

Extracting media from CD
Initializing the disk
1. Use the Micro USB cable to connect the AK100 to
the computer’s USB terminal and run iriver plus 4.
2. Select [Device - Initialize disk], when the window
displayed prompts whether you want to continue, click [Start].
3. When initialization is completed, the completion
window will be displayed and the computer will be
disconnected.
Sending media to the product
1. Use the Micro USB cable to connect the AK100 to
the computer’s USB terminal and run iriver plus 4.
2. Select the file’s check box to send from the computer
to the AK100, then click the [Send] button or drag &
drop the file to the device icon or AK100 window at
the bottom. Check the file transfer progress in the
[File transfer] tab.
3. When transfer is completed, check that the selected
music has been added to the AK100's library.
User Guide
1. Insert a music CD in the CD drive, and run iriver plus 4.
2. Select the check box for the music to extract from
the [CD] tab of iriver plus 4, and select [CD ripping]
at the bottom of the window.
3. When music extraction is completed, select
[All music] to check that the extracted music has
been added to the library.
Getting Started 11
When using External SD card, support slot1 only.