Operation Manual

Getting Started 11
User Guide
Refer to page 45 for connecting to a wireless network.
The firmware upgrade may not initialize if the battery level
is too low. (A minimum battery level of 50% is required.)
Moving to another screen during the file download will
cancel the download.
Do not disconnect from the wireless network while
downloading a firmware upgrade. Doing so may cause
data corruption and/or damage to the system.
If an error occurs or the notice in the Notification Bar
disappears during an upgrade, download the firmware
upgrade again through [ - Update - System Update].
Wi-Fi Update / OTA (Over-the-Air)
1. Connect to a wireless network.
2. When a new firmware version is found, a Firmware Update
Guide window will be displayed on the screen.
3. Select [Update] and choose the items for update.
4. Follow the on-screen instructions and proceed with the
firmware upgrade.
Firmware
Upgrade