Operation Manual

Using the Device 39
Bluetooth Support Specifications
Profile: A2DP
Device performance may be affected during Hi-Fi playback.
(48 kHz or lower is recommended)
DSD playback is unavailable via Bluetooth.
Do not turn off the device while connected to Bluetooth.
Power cycle the Bluetooth device in case of malfunction.
Pairing methods may differ for each individual Bluetooth device.
Always refer to the respective instruction manual for details.
When connecting the product to a Bluetooth device, the
distance between the two must be within 20 cm.
Audio quality will degrade with longer distances, and the
pairing may disconnect at a distance of 2 m (6.5 ft) or more.
(Distances may vary depending on device and environment.)
Crosstalk may be heard while using Bluetooth.
For multipoint devices, make the necessary connections
prior to use.
Car audio Bluetooth connections are not supported.
Malfunction, noise, and other undesirable effects may
occur due to the device's battery level and the environment.
Signal interference affects data transmission. (e.g. holding
the device while wearing a Bluetooth device, holding the
device while holding another electronic device, etc.)
The device or Bluetooth headset's radio transmitters are
affected by touching parts of the body.
Transmission strength is affected by walls, corners,
partitions, etc.
Devices using the same frequencies may cause interference.
(e.g. medical devices, microwave ovens, Wi-Fi, etc.)
Areas with an excessive amount of interference or weak signals
(e.g. elevators, underground, etc.) affect performance.
Removing a Bluetooth Pairing
1. Press [ ] on the right side of
the paired device to be directed
to the settings screen.
2. Select [Remove Pairing] to
complete the process.
User Guide