Operation Manual

User Guide
Using the Device 42
Connecting
to a
Network
Connecting to a Wireless Network
1. Select [Settings - Network - ] to display a list of
available access points (AP).
2. Select the desired AP to connect to the wireless network.
Additional information (encryption key, index, etc.) may
be required depending on the network settings.
The device will automatically connect to your wired network
when a LAN cable is connected. To connect wirelessly,
disconnect the LAN cable.
You will not be able to wirelessly connect to the your network
if additional authentication is required (e.g. web browser
authentication, etc.)
Channels 1 through 11 are supported.
Connecting to a Wired Network
1. Connect the appropriate Internet-ready network cable
(ADSL, VDSL, cable modem, wired/wireless router, etc.)
to the [LAN Port] on the back of the product, or connect
wirelessly to an access point (AP) that provides Wi-Fi
access.
2. You can access the network when IP information is
confirmed in the IP Address field.
We recommend using a wired network for the best network
performance.