DSF11 INSTRUCTION BOOK User Guide
CONTENTS (FUUJOH 4UBSUFE _01 Safety Precautions 02 Package Contents 06 DSF11 at a Glance 07 Assembly 09 Power Cable Management 11 Connections 12 Firmware Upgrade 15 6TJOH UIF %FWJDF _02 Basic Operations 16 Home Screen 20 Playback Screen 22 Selecting Music 24 MQS Streaming 26 AK Connect App 27 Listening to Music 32 Listening to Internet Radio 33 Purchasing Music from the Store 35 Connecting an External Device 36 Settings 38 Connecting to a Network 42 Equalizer Setup 43
User Guide Safety Precautions To ensure safe product usage, check the [Safety Precautions] before you begin using the product. Device Discontinue use of this product immediately if it does not operate normally or a failure occurs. When a plug is inserted into the AUX, Optical, or USB port or a card is inserted into the microSD slot, do not apply any force or shock to the plug or card. Do not insert any metal objects (coins, hairpins, etc.) or flammable debris into the device.
User Guide Never attempt to insert an unsuitable cable into a connector. Never connect a damaged cable to the product. Doing so may cause a malfunction. Using poor quality protective films or adhesive stickers on the screen may cause damage. Use clean, dry hands when touching the screen. Do not apply excessive pressure when touching the screen. Displaying one image for an extended period may cause screen burn-in (afterimage). Power Cable and Plug Do not connect/disconnect the power plug with wet hands.
User Guide Plug the power cord into a grounded power outlet. Hold the power plug firmly when disconnecting it from the outlet. Disconnect the power cord from the outlet when the device is not being used for an extended period. This may cause a fire or electric shock. Installation To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Avoid exposing the product to water, and do not place objects filled with liquids, such as vases, on top of the device.
User Guide USB Storage Device The USB port on this product only supports USB host functionality. A computer cannot be connected to the USB device port. Large-capacity USB devices may require several minutes to fully scan. If static electricity is generated when connecting a USB device, playback may not function normally. In this case, disconnect and then reconnect the USB device. DRM-protected files (WMA-DRM* tracks) cannot be played on this product.
User Guide Package Contents Components may be changed without prior notice to improve the performance or quality of the product. DSF11 Base Power Cord T-wrench Bolts Adapter Quick Start Guide & Product Warranty Base: Connects to the bottom of the DSF11. Power Cord & Adapter: Connects to the device to supply power. T-wrench: Used to fasten/loosen bolts. Bolts: Used to fasten/loosen the base and support. Quick Start Guide: Basic overview of device functionality.
User Guide The DSF11 requires assembly of the top, main unit, base, and support by the user. Refer to [Assembly] on page 9~10 or assembly guide printed on the packaging above the stand for detailed assembly instructions. DSF11 at a Glance The appearance of the product as well as printed and engraved information may vary depending on the model.
User Guide Power/Volume Key: When the wheel key is pressed, the product will power on, and the [ ] logo will appear on the screen. LCD Touchscreen: Display with touch control. Back Button: Pressure-sensitive metal capacitive touch interface. A light touch will return the user to the previous screen. Home Button: Pressure-sensitive metal capacitive touch interface. A light touch will redirect the user to the main menu.
User Guide Assembly 1. Please refer to the assembly guide printed on the packaging above the stand. 2. Align the bolt holes on the main unit and base, and secure the base to the main unit using the supplied T-wrench and bolts. 3. Connect the power cord to the adapter, and then connect the adapter to the [Power Input] port on at the base of the main unit.
User Guide 4. Align the connection points on the stand and behind the LCD screen, and then securely connect the two parts. Do not apply excessive force to the top of the product and the grill on the main unit. Please note that any impact or shock during assembly may damage the product.
User Guide Power Cable Management Connecting the Power Supply 1. Connect the power cord to the [Power Input] located at the base of the unit. 2. Connect the power cord to the outlet and press the [Power Wheel] located above the LCD screen for 2 to 3 seconds. The product will power on, and the [ ] logo will appear on the screen. After connecting the power cord to the product, insert the power plug into an available outlet.
User Guide Connections Inserting/Removing a microSD Card 1. Refer to the diagram and gently insert a microSD card into the [microSD Card Slot]. 2. Gently press the microSD card to release it from the slot. Recommended microSD Cards Brand : SanDisk, Transcend 64GB microSD card is recommended. Notes on inserting a microSD card Do not force the microSD card into the slot. Doing so may cause damage to the device and/or the microSD card. Do not repeatedly insert/remove the microSD card.
User Guide Connecting a USB Storage Device 1. Connect a USB storage device to the [USB Port] on the product. Devices that require separate drivers or the creation of multiple drives (multi-card readers, etc.) may not be supported. Some USB devices that require a separate power supply (external HDD, etc.) may not function properly. Connecting an External Device to the AUX Port 1. Connect an external device to the [AUX Port] using an AUX cable.
User Guide Connecting an External Device to the OPTICAL Port 1. Connect an external device to the [OPTICAL IN Port] using an optical cable. Gently insert the cable into the port. Avoid using excessive force. Do not move the product while a cable is connected. Connecting to a Network 1. Connect the appropriate Internet-ready network cable (ADSL, VDSL, cable modem, wired/wireless router, etc.
User Guide Firmware Upgrade Firmware Upgrade 1. Connect the product to a wired or wireless network. 2. When a new firmware version is available, the screen displays a Firmware Update Guide window. 3. Select [Update] and choose the items for update. 4. Follow the on-screen instructions and proceed with the Firmware Upgrade. Refer to page 42 for more information on connecting to a network. Moving to another screen during a file download will cancel the download.
User Guide Basic Operations Using the LCD Touchscreen 1. This device features an LCD touchscreen that allows you to perform operations by touching the screen. Touch the desired item from the on-screen menu (icon) to run the selected function. To prevent damage to the screen, do not use a sharp object or excessive force. Basic Settings A welcome screen is displayed when the product is turned on for the first time. The basic setup process will begin. 1.
User Guide 3. Enter a name for the device in the name settings screen, and then press [ ]. 4. Connect to a network from the network settings screen. Wired network: The device will automatically connect to your network when a LAN cable is connected. Wireless network: To connect to a wireless network, select your network from the list of available access points (AP).
User Guide 5. Press [Start] after completing the network setup to begin using the DSF11. Refer to page 42 for more information on connecting to a network.
User Guide Moving up/down in the list 1. Scroll through a list by dragging [Down Up] / [Up Down] on the screen. Previous Screen 1. Press [ ] to return to the previous screen.
User Guide Home Screen Navigating on the Home Screen Drag the Home screen [Up Down] to move through the menus. After entering a menu, press [ ] at the top of the screen or the [ ] key on the right to return to the previous screen. Press [ ] on the right of the screen to be redirected to the Home screen. Connect Library : You can select other storage devices on the same network as the DSF11 including a PC, NAS, AK500N, and AK380.
User Guide SD Card : Mount a microSD card to activate the corresponding menu and select music for playback through the DSF11. AUX : Connect an external device to the DSF11 via an AUX cable to activate the corresponding menu and output sound through the DSF11. USB : Connect a USB storage device to activate the corresponding menu and select music for playback through the DSF11. Optical : Connect an external device to the DSF11 via an optical cable and touch the Optical menu to output sound through the DSF11.
User Guide Playback Screen 1 2 3 4 5 6 1 Previous Screen Return to the previous screen. 2 Details Displays bitrate and sampling frequency data. 3 Title Song title information. File name is displayed when ID3 metadata is unavailable. 4 Artist Artist name. 5 Album Cover Displays album covers. 6 Song Progress Indicates song duration.
User Guide 4 5 1 1 2 6 3 7 Progress Bar Indicates song progress. Drag the progress indicator to move to the desired track time. 2 Play/Pause Play or pause the current song. 3 Previous/ Short press: Previous song. Rewind Long press: Rewind the current song. 4 Repeat Mode Set the repeat mode. 5 Play Mode 6 Song Duration Indicates the song’s total duration. 7 Next/ Set the playback mode. Short press: Next song. Fast-Forward Long press: Fast forward the current song.
User Guide Selecting Music Selecting Music on a Server Music on a server on the same network as the DSF11 can be played back in real-time. 1. Select [Connect Library] from the Home screen to display a list of devices available for connection. 2. Select a device to be used as a library to display its database contents. If the device connected to Connect Library supports the AK database, the contents will be automatically sorted according to Songs, Artists, Albums, Genres, and Folders.
User Guide Selecting Music on a microSD Card 1. Mount a microSD card to activate the microSD card menu. 2. Select the activated microSD Card menu to display a list of music files on the microSD card. Refer to page 12 for more information on connecting a microSD card. Press [ ] at the top of the screen to display the current playback screen. Selecting Music on a USB Storage Device 1. Connect a USB storage device to the USB-HOST port to activate the USB menu. 2.
User Guide Refer to page 13 for more information on connecting a USB storage device. Press [ ] at the top of the screen to display the current playback screen. Devices that require separate drivers or the creation of multiple drives (multi-card readers, etc.) may not be supported. Some USB devices that require a separate power supply (external HDD, etc.) may not function properly. MQS Streaming Music on a PC on the same network as the DSF11 can be played back in real-time.
User Guide Selecting an MQS Streaming Server 1. Complete the installation and run the MQS Streaming Server from the computer. Refer to [MQS Streaming Server Help] on the Astell&Kern website for installation help. [http://www.astellnkern.com > Support > Download] 2. When the DSF11 and your PC are connected to the same network, your PC will be displayed in a list when Connect Library is selected on the DSF11. 3.
User Guide Connecting to a Library 1. Select the downloaded app to run the AK Connect wireless control app. 2. A list of available devices on the same network will be displayed. 3. Select the desired device to display a list of folders and files. The device you want to connect via AK Connect must be on the same network (access point) as the DSF11. When connected to the network wirelessly, music streaming may stutter or next song playback may be slow depending on wireless network conditions.
User Guide App Screen Player: The currently-playing song can be controlled via the Next, Previous, Play, Stop, and Volume buttons. NowPlaying: Displays a list of songs currently playing. Playlist: Displays the playlist. Songs can be added or removed. Library: Select from an external device with the songs you want to play. Speaker: Select the sound output device.
User Guide Creating a Playlist 1. Press [ ] at the top-right corner of the Library screen, and then select a playlist for adding songs. Existing Playlist: Add the selected file to an existing playlist. New Playlist: Add the selected file to a new playlist. NowPlaying List : Add the selected file to the current playlist. 2. Select the song you want to add, and then press [+ ADD TO] to add the song to the playlist.
User Guide Connecting Speakers 1. Select [Speaker] at the bottom of the Library screen to display a list of speakers on the same network. 2. Select the desired speaker to output sound through the speaker. App Usage Example Select the DSF11 from the AK Connect app's [Speaker] menu. Specify [NAS] in the Library menu, and then select the desired song to play back music through the DSF11. Smartphone/Tablet NAS DSF11 The AK Connect app, DSF11, and NAS must all be connected to the same network.
User Guide Listening to Music Music Playback 1. Select a song from the list to begin playback. Select [Folder] to search music by folder. Supported file formats: FLAC, WAV (8-192 kHz, 8/16/24-bit), WMA (8-320 kbps), MP3 (8-320 kbps), OGG, APE (Normal, Fast, High), AAC, AIFF, ALAC, DFF, DSF Listening to Music Adjust the volume by turning the [Power/Volume Wheel Key] above the LCD touchscreen. When the volume is displayed on the screen, adjust the sound level by dragging the screen [Up Down].
User Guide Listening to Internet Radio Internet Radio Playback You can listen to a variety of Internet radio stations provided by vTuner. 1. Select [vTuner] from the Home screen to display the Internet Radio home screen. 2. Select the desired item from the Internet Radio home screen to display a list of available stations. 3. Select the desired station for Internet radio playback.
User Guide You must be connected to the Internet to listen to Internet radio stations. Internet radio playback may stutter or be delayed depending on network conditions. Available Internet radio stations may vary by region. Listening to Internet Radio Press [ ] during playback to pause and [ ] to resume playback. Press [ - ] from the station list or radio playback screen to display the Internet Radio home screen. Press [ - ] at the top-right corner of the screen to display the search field.
User Guide Purchasing Music from the Store You can conveniently purchase music from the Store Purchasing Music 1. Press [STORE] from the Home screen to display the Store. 2. Check the user guide or help menu within each store for detailed information. For Groovers, select [Menu > User Guide] within the store for detailed instructions. 3. Purchased music is downloaded to a connected USB storage device or microSD card. You cannot download music unless a USB storage device or microSD card is connected.
User Guide Connecting an External Device You can listen to music through the DSF11 by connecting an external device. Connecting via Bluetooth 1. Select [Bluetooth] from the external device’s settings, and set it to ON. 2. Select the DSF11 from the list of available Bluetooth devices to begin pairing. 3. The [Bluetooth] menu item will be activated on the Home screen. Select a song from the external device to begin playback through the DSF11’s speakers.
User Guide Instances in which the device or Bluetooth headset's radio transmitters are touching parts of the body. Instances in which the transmission strength is affected by walls, corners, partitions, etc. Devices using the same frequencies may cause interference. (e.g. medical devices, microwave ovens, Wi-Fi, etc.) Areas with an excessive amount of interference or weak signals (e.g. elevators, underground, etc.) affect performance. Connecting via AUX Port 1.
User Guide Settings Set up the device according to the user's needs. The settings menu may vary depending on the firmware version. Setup 1. Select [Settings] from the Home screen. 2. Select the desired item for setup. Network Select the [Network] icon to set up a wired or wireless network. : Change wireless network settings and turn Wi-Fi on or off. : Change wired network settings. After selecting the desired icon, select the network menu to adjust the settings.
User Guide Equalizer Set the equalizer according to the user's preferences. Pro EQ: EQ preset recommended by professionals. User EQ: Adjust the frequencies according to the user's preferences. Equalizer is not supported during DSD playback. Using the equalizer may negatively affect device performance. Refer to pages 43~44 of the manual for more information on using the equalizer. Device Name You can change the device name by using the on-screen keyboard. The defined device name will appear on the network.
User Guide LR Balance Set the left/right balance of the sound output. Turn the dial to adjust the left/right balance. Brightness Adjust screen brightness settings. LED Brightness Adjust the LED brightness on the front of the device. Date and Time Manually set the current date and time. Language Select a language. English, Korean, Japanese, Chinese (Simplified/Traditional), German, French, and Russian. Keyboard Set a suitable keyboard for the selected language.
User Guide Update Automatically update the firmware via OTA (over-the-air) when a new version is available. System Information View system information, device name, firmware version, USB storage device capacity, and microSD card capacity. Storage capacity is displayed according to OS standards. Some variance in displayed capacity may be present. Default Setting Revert all user settings back to their original values. Never turn off the power while a factory reset is in progress.
User Guide Connecting to a Network Connecting to a Wired Network 1. Connect the appropriate Internet-ready network cable (ADSL, VDSL, cable modem, wired/wireless router, etc.) to the [LAN Port] on the back of the product, or connect wirelessly to an access point (AP) that provides Wi-Fi access. 2. You can access the network when IP information is confirmed in the IP Address field. We recommend using a wired network for the best network performance. Connecting to a Wireless Network 1.
User Guide Equalizer Setup Equalizer Setup 1. Enable the equalizer menu from [Settings - Equalizer]. 2. Press [USER EQ] at the top of the screen and select [ADD]. 3. Enter a name for the equalizer, and then select [OK]. 4. Set the equalizer according to the user's preferences. Resetting the Equalizer 1. Select the desired EQ setting and press [ ] to revert the EQ to its default settings.
User Guide Deleting an Equalizer 1. Press [ ] next to the desired EQ setting. Press [YES] to complete process. Renaming an Equalizer 1. Select [ ] next to the desired EQ setting, and then enter a new name. 2. Press [OK] to complete the process.
User Guide Notes Cleaning the Device Keep the device clean to ensure the best possible performance from this unit. Disconnect the power cord before cleaning. Wipe off any stains with a soft cloth. For heavy stains, wipe with a damp cloth, and then finish with a dry cloth. Please keep the following in mind to avoid reduced performance and damage to the device/paint: Do not clean with an abrasive cloth. / Do not use excessive force when cleaning. / Do not clean with paint thinner or benzene.
User Guide 5. There is no sound, or there is static/interference. Verify that the volume is not set to [0]. Check that the appropriate cables are plugged in properly. Make sure that no obstructions such as debris are on the audio ports or plugs. Verify that the audio settings have been properly set. Verify that the music file is not corrupted. 6. File will not play back, or a specific file causes instability. The following may occur due to the condition of a file: Playback is unstable or difficult.
User Guide Copyright iRiver Limited retains the rights to patents, trademarks, copyrights, and other intellectual property rights related to this manual. No contents of this user manual may be duplicated or reproduced in any format or by any means without the prior approval of iRiver. Using or reproducing, in whole or part, the contents of this document is subject to penalties. Software, audio, video, and any other copyrighted contents are protected in accordance with relevant copyright laws.
User Guide Registered Trademarks Windows 2000, Windows XP, Windows 7, Windows 8, and Windows Media Player are trademarks of Microsoft Corp. © 2012 CSR plc and its group companies. The aptX® mark and the aptX logo are trade marks of CSR plc or one of its group companies and may be registered in one or more jurisdictions. Disclaimers The manufacturer, importer, and distributor shall not be liable for any damage including accidental and personal injury due to the improper use or operation of this product.
User Guide Specifications Speaker System 3 Way Multi Channel Active Speakers (4th CrossOver filter) 0.75” Tweeter x2, 2.0” Midrange x2, 6.5” Wooferx2 Active CrossOver Hybrid Amplifier(Analog Amplifier for Tweeter, Digital Amplifier for Midrange/Woofer) Frequency Range 48Hz ~ 22kHz Display 4.0-inch(101.