User's Manual

Learning the basic features | 16
Charging
Charging by connecting with a computer
1. Open the cover at the bottom of the product.
2. Turn the computer on and connect with the product using a USB cable.
3. The internal battery is automatically charged.
While recharging,the Recharging LED will flicker on and off. Once recharging is completed, the
Recharging LED will remain on. (If power is turned on while recharging is in progress, the Booting
LED will come on, but once booting is completed, the Recharging LED will flicker on and off again.)
Do not use cables other than the USB cable provided. It may cause malfunction.
Ensure that the device is connected to a high-power USB 2.0 port. If connected to a low-power USB port
(e.g. some keyboards or USB hubs without a power supply of their own) the device may not fully recharge.
If the computer is in sleep mode, the product may not be charged.
If the device is being charged whilst on, charging may take longer.
Room temperature enables best operating conditions.
The rechargable battery is a consumable, so the amount of time it can be used gradually decreases.
It takes approximately 5 hours to charge when completely discharged and when the power
is off. If you use the product while charging, it may take more time to charge.
If the battery is completely discharged and has not been used for a long time, power will not
come on again until it has been charged for at least ten minutes.
In case where you recharge the batteries using the adapter, we do not provide warranties for
adaptors other than those sold by iriver.