User's Manual

Connecting
Learning the basic features | 18
Inserting/removing the SD card
1. Turn the power off, place the SD card (see the figure below) in the SD card
slot, and press it in gently.
2. Press it in once more and the card can be removed.
Recommended SD cards
Brand: SanDisk, Transcend
Insert/remove the SD card while the power is off.
Do not force the SD card. It may cause malfunction and damage to the SD card.
Do not detach the SD card when in use. It may delete data, cause malfunction, or damage
the SD card.
If the SD card is not positioned properly, the product may malfunction or the card may get stuck.
If SD cards other than the recommended ones are used, it may cause malfunction.
The transfer rate of the SD card may differ according to the PC status.
SD cards cannot be formatted using the product. Use a card reader to format.
When formatting an SD card, all the data are deleted, so back up the data before formatting.
When formatting an SD card, we recommend that you use the FAT 32 system.
If an SD card is not recognized or malfunctions, try to use it again after formatting.
SD cards must be purchased separately.
This product recommends that you use an SD card up to 32GB.