Hardware Instruction Manual Digital Audio player/ Recorder/FM Tuner Model iFP-800 Series iFP-800 Series Thank you for your purchase. Please read this manual carefully before using your new player. www.iRiver.com www.iRiver.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Contents GETTING STARTED 1 LOCATING THE CONTROLS 2 PC SOFTWARE INSTALLATION 3 BASIC OPERATION 4 CONVENIENT FUNCTIONS 5 ADDITIONAL INFORMATION 6 NOTE THIS MANUAL COVERS THE INSTALLATION AND USE OF THE PLAYER HARDWARE. FOR DETAILS REGARDING THE SOFTWARE OPERATION INCLUDING TRANSFERRING MUSIC TO THE PLAYER, PLEASE SEE THE SOFTWARE INSTRUCTION MANUAL.
GETTING STARTED CONTENTS 1-1 FEATURES 1-2 ABOUT POWER SUPPLY 1-3 NOTE Getting started... INTERNET THIS MANUAL COVERS THE INSTALLATION AND USE OF THE PLAYER HARDWARE. FOR DETAILS REGARDING THE SOFTWARE OPERATION INCLUDING TRANSFERRING MUSIC TO THE PLAYER, PLEASE SEE THE SOFTWARE INSTRUCTION MANUAL.
INTERNET FEATURES URL : www.iRiver.com Update your player with firmware downloads. Firmware upgrades offer support for new CODECS and deliver new product features. Consult the product FAQ. Register your iRiver product online so that our Customer Service is able to provide support as efficiently as possible. All contents contained in this manual subject to change without notice to improve ability of this player or according to changing of specification.
ABOUT POWER SUPPLY Locating the Controls Inserting a battery Insert the battery. (AA 1.5V type x 1ea) Be sure to match the + and ends of the battery with the diagram inside the battery compartment. Front View 2-1 Side View 2-2 LCD Screen 2-3 Locating the Controls Getting started... Open the battery cover. Contents Close the battery cover. NOTE If the battery is worn out, “Low Battery” is displayed on the LCD. Insert a fresh battery.
Locating the Controls Locating the Controls Front View Side View MIC LCD Screen Volume + Earphone USB Connection Port STEREO Power ON/OFF / (Play/Stop) NAVI/MENU LINE IN MODE/REC MEMORY/EQ A-B (Interval repeat) Locating the Controls Locating the Controls I (Next Track/Fast Forward) HOLD Volume I (Previous Track/Fast Reverse) Battery 2-1 2-2
Locating the Controls PC software installation LCD Screen Contents SONG NUMBER PLAY TIME PLAYBACK MODE HOLD Locating the Controls PC software installation 3-1 BATTERY INDICATOR FOLDER NAME Attach the player 3-4 ARTIST/TITLE NAME PROGRAM Detach the player 3-7 VOLUME BIT RATE EQUALIZER SAMPLE RATE VISUALIZATION NOTE THIS SECTION COVERS THE INSTALLATION FOR WINDOWS OPERATING SYSTEMS ONLY. FOR INSTALLATION INSTRUCTIONS FOR MAC OS, PLEASE SEE THE SOFTWARE INSTRUCTION MANUAL.
PC software installation PC software installation Software installation Software installation IMPORTANT Please complete the steps in this section BEFORE ATTACHING YOUR PLAYER TO YOUR PC. " Insert the Installation CD into the CD-ROM drive. The following screen appears after inserting the CD. PC software installation The player can store MP3 files or files of any type. You can upload files, other than music (MP3, WMA, OGG, ASF), to the PC using the iRiver Music Manager Program.
PC software installation Attach the player Software installation “Next” after confirming the 5 Click installation folder. Connecting to the PC 6 Click “Install” to begin the installation. 1 Connect the USB cable (provided) to the USB port of your computer. Type “A” Type “A” USB cable USB port on the PC 7 Installation is in progressing. Click “Finish” after the installation is completed. on the player by pressing the button 2 Turn marked STEREO.
Attach the player Attach the player Installation of New Hardware Installation of New Hardware computer will automatically search to installing iRiver Music Manager from 1 After 2 The find your new hardware. the CD and connecting the player to your PC, "Found New Hardware" screen is displayed. a "Hardware Installation" warning 4 Ifmessage appears, click "Continue Anyway". (Windows XP) The iRiver software driver will not cause any damage to your computer.
Detach the player Basic Operation Safely Removing the player from the PC the “Safely Remove hardware” 1 Select after clicking the “Safe To Remove 2 Contents Click the “Stop” after selecting the device to remove. Hardware” by using the right button of mouse. the “Close” after confirming the 4 Click Safely Remove Hardware message. 4-1 Basic Operation 4-3 Operating the FM Tuner 4-7 Basic Operation PC software installation the “OK” after confirming the 3 Click hardware to remove.
Listening to Music Listening to Music LISTENING TO MUSIC Connect the earphones as shown below. Put the HOLD switch to “OFF”. OFF To turn on the player Click To play the next folder h Pus To play Press the PLAY/STOP button to turn on the player. Press it again to play.
Basic Operation Basic Operation Basic Operation Changing Functions Press and hold the MODE button to display the current function. Push the I to select the desired function, then click the NAVI/MENU button toward I or NAVI/MENU button to enter that mode. lick Long C 1. LCD window : Displays the operating status of the player. Navigation MP3 FM FM RADIO VOICE MP3 Playback Xtrm EQ Menu FM Receiving Voice Recording Selecting FM Tuner Mode Press the STEREO button to select STEREO or MONO.
Basic Operation Basic Operation NAVIGATION DELETING FILES ON THE PLAYER Press NAVI/MENU button and find the desired track by pushing the VOL + or VOL – button. button. To select the track, press the NAVI/MENU button, I or the 1 Stop playback. During MP3 playback, you can select the playback mode by turns by clicking the MODE/REC button. Click Repeat Playback the “MODE” button. 4 Click “FILE DELETE ARE YOU SURE?” is displayed on the screen. Select “YES” by using I or I (VOL + or VOL -) to delete.
Operating the FM Tuner Operating the FM Tuner OPERATING THE FM TUNER To select STEREO/MONO switch to the FM Tuner, press and hold the MODE/REC button. 1 To The current function is displayed. Press the STEREO/PLAY/STOP button to select Stereo/Mono. lick Long C Click MP3 The function selection graphic displays on the LCD. the I 2 Push confirm. , VOICE LINE IN Auto Scan function I switch to select FM RADIO.
Operating the FM Tuner Operating the FM Tuner Memory delete function (Delete saved stations) Memory Function (Save stations) 1 Select a station by pushing the 2 Click Push or and select the desired station. Select CH02 Click Save complete Click To cancel Saving will exit the memory function without saving. Auto memory function Press and hold the A/B MEMORY button to automatically select select stations and save them in sequential order.
Recording-FM Tuner Recording-Voice To record FM Press the MODE/REC button during FM reception. The station will be recorded, the remaining recording time will be displayed on the LCD screen. Recording Voice To pause FM recording Click Press PLAY/STOP button to pause the recording process. Press PLAY/STOP button again to restart recording. 1 Press and hold the MODE/REC button. the or (VOL + or VOL 2 Press ) switch to select Voice mode.
Recording-Voice To stop recording Press the MODE/REC button. Recording-External audio source Recording from an external audio source To play a recorded file Press the PLAY/STOP button. Click 1 Connect the LINE OUT jack of the external equipment to the LINE IN jack of the player. Click To pause voice recording MONO 32KHz 32KBPS Press Press button during recording. button again to restart recording.
Recording-external audio source Recording-external audio source Recording from an external audio source To stop recording the I or I (VOL + or VOL -) the NAVI/MENU button (or 4 Press 5 Press switch to select the LINE-IN mode. PLAY/STOP) to go to LINE-IN recording mode. (Record Standby Mode) h Pus 1 Press the MODE/REC button. To play a recorded file [ 1] 1 Press the PLAY/STOP button. Click Click Click Click or STEREO 44.
