User's Manual

Click “Finish”.
The installation is completed.
To connect the iHP-100 to the Host PC
Type “A”
Type “B”
USB port on the PC
USB port on the iHP Series
USB cable
Type “A”
Type “B”
To install the iHP-100 Device Driver
Click to turn on the player.
Connecting the USB cable between the player and Host PC.
Check whether the icon on the window was
made.
OnlyaiconmaybemadeaccordingtotheO/S.
Confirm whether new driver is added
on the explorer.
The initial volume name is “iHP-100”.
If the host PC using Windows98 etc. do not recognize the player,
install iHP-100 Device Driver to the host PC (Refer to page 12).
Click “Next” after selecting the
folder saved the “iRiHP. inf”
Click “OK” after selecting the
folder installed the “iRiHP. inf” file
(C:\ProgramFiles\iRiver\iHP100\
drivers)
Click “Next”
Click “Next”
Click “Finish”
Completed the installation of “Device Driver”.
Click “Next” after selecting
“Driver Search” option.
If the player is recognized on the
host PC,
Add New Hardware
Wizard
is activated. Click “Next”.
10 11
This processing must be done after installing the iHP-100 Manager Program.