Operation Manual

17
2-3 Connecting product
Using the Controls
Connecting Remote control / Earphones
Connect TV
1. Set the Display switch on the back of the product to AV OUT.
2. Connect AV cable to the TV as shown below.
(Yellow - Image, White - Audio/L, Red - Audio /R)
Yellow
White
Red
1. Connect Remote control cable with product as shown on below diagram.
2. Connect Remote control with earphones jack.
Remote control
Earphones jack
16
2-3 Connecting product
Using the Controls
Power on
External Battery pack
1. Connect the external battery pack as indicated below.
Recharging is possible with supplementary battery pack.
The player can be recharged even when powered off.
To extend the life of the batteries (rechargeable batteries) :
- Turn the Display switch to OFF when the main TFT LCD display or
TV OUT is not in use.
- Set the Display Time of the main TFT LCD to a shorter time.
- Adjust the backlight brightness of the TFT LCD to a lower value.
- Disable the EQ feature.
- If you are using the remote control (sold separately), set the duration
of the backlight illumination of the Remote Control LCD to a shorter time.
When the volume is set to 0, there is no sound through the AV OUT.