Bluetooth Headphone AMP XB10 INSTRUCTION BOOK www.iriver.co.kr © 1999~2016 IRIVER Limited. All rights reserved.
What’s Inside ENGLISH The items listed herein are subject to change without prior notice for the purpose of performance improvement or due to the manufacturer's circumstance.
Mounting the Clip 1. Please remove the rubber cover on the bottom of the Overall Structure Volume Control Key Bluetooth Key Power/Lock Key product. 2. Please insert one side of the clip first and then do the same with the Play/Pause and Multi-key Skip Next/Previous Song Key Status LED other side. 3. Push the two side Micro-USB Port (for Recharging) 3.5 mm Port slightly for a snug fit. 2.
Skip Next/Previous Song Key Replays the next/previous song. Power Key To the right: You can turn the device on/off by pushing the key to the right side for about 3 seconds. To the left: You can lock all keys by pushing the key to the left side. Volume Control Key You can control the volume by using the [+]/[-] keys. Bluetooth Key You can pair this device with other devices equipped with Bluetooth functionality.
Bluetooth Pairing Qualcomm® aptX™ / Qualcomm® aptX™ HD audio The XB10 supports Qualcomm® aptX™ and Qualcomm® aptX™ HD audio codec standards. Qualcomm® aptX™ and Qualcomm® aptX™ HD audio codecs only work on smartphones and audio devices that support the technology. 1. You can turn on the power by pushing the power key on the side of the device to the right for 3 seconds. 2.
Multi pairing 1. Have two devices (A&B) for multi pairing ready. Listening to Music Press the [ [ ] key once lightly. Press the ] key once while the music is played. 2. Connect the first device (A) and XB10. If you want to start replaying again, press 3. Press the Bluetooth key to enter the it again. pairing mode. (At this time, A that is When replaying music first time, you may paired will be disconnected.) have to activate the music player of the 4. Connect XB10 and the second device (B). 5.
Press the [ ] key for 4 seconds and you can hear a beep sound with blue and green alternating lights before the DCT mode is turned on. Press the [ ] key for 4 seconds when the DCT mode is on and you can hear a beep sound before the DCT mode is turned off. Talking on the Phone 1. Once the phone rings, you can take the call by pressing the [ ] key in the product. You can reject an incoming phone call by pressing the [ ] key for 3 seconds. 2.
Recharging 1. You can recharge the product by inserting a Status Indicator Light Power on Micro USB cable that comes with the package The light turns blue and then flashes in the USB port located on its side. The indicator Power off shows a red light if it is being recharged and Flashing red light it shows a blue light if it is fully charged.
Specifications Status of a call outgoing Product Name Blue light flashing once every 0.5 second Bluetooth Version Bluetooth 4.1, Class2 Charging Red light on Charging completed Blue light on A2DP (multi), AVRCP, HFP, HSP Frequency Band 2.4 - 2.4835 GHz ISM Band Receiver Sensitivity -90dBm@0.
Troubleshooting 1. The device won't turn on. Please check whether the power adaptor is connected properly. Please check whether the device is charged. Charge with 5V 2A output adapter. We recommend the use of the Micro USB cable that comes with the package. 2. No sound comes out except static and noise. Please check whether the volume set at [0]. Please check whether the earphones are plugged in properly, and make sure dust isn't obstructing the port connection.
Copyright Disclaimers iriver Limited retains the rights to patents, trademarks, copyrights, and other intellectual property rights related to this manual. No contents of this user manual may be duplicated or reproduced in any format or by any means without the prior approval of iriver Limited. Using or reproducing, in whole or part, the contents of this document is subject to penalties. Software, audio, video, and any other copyrighted contents are protected in accordance with relevant copyright laws.
FCC notification to users This equipment has been tested and found to comply with the limits for a CLASS B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
