Users Manual Part 2

Using the Device 40
User Guide
CD Ripping Results
: Indicates that CD ripping is complete, or that CD ripping
was successfully completed after correcting an error
via error correction.
: Indicates that the song currently being ripped can be
canceled by user.
: Indicates that CD ripping failed due to an error that
can’t be corrected, such as a scratched CD, or that CD
ripping was canceled by user.
To search the Gracenote database, the device must be connected to
Wi-Fi. Database access time may vary depending on the network
environment.
Please note that metadata for certain CDs may not be available on
the Gracenote database.
You cannot access the Home Screen while CD ripping is in progress.
The AK Connect service will be disabled during CD ripping. The
service will automatically restart when CD ripping is completed.
Music playback is disabled during ripping.
You can set the desired file format and ripping speed from the
[Menu - Settings - CD Ripping] menu.
Several attempts at correction will be made for data with errors
when the feature is enabled under [Menu - Settings - CD Ripping -
Error Correction]. Please note that the CD ripping speed will be
affected when this feature is enabled.
2. Connect AK CD-RIPPER and insert CD to display the [CD
Ripping] notification at the bottom of the Notification Bar.
3. Press [CD Ripping] and select from the file format options
of FLAC or WAV.
4. If Wi-Fi is turned on the Gracenote database will be searched
for matching CD metadata after the file format is selected.
5. When the database search is complete, press [Start] to
begin CD ripping.