Instruction Manual www.iriver.com T20 T20 Thank you for your purchase. Please read this manual carefully before using your new player. http://www.iriver.
Contents z Some features might not be available in every region. Before using the product Welcome .................................................................................................... 03 Homepage ................................................................................................. 03 Copyrights/Certification/Trademarks/Limited Liability ..................... 04 Safety Instructions ...................................................................................
Before using the product Before using the product Welcome Copyrights/Certification/Trademarks/Limited Liability Thank you for your iriver purchase Copyrights Thank you for your iriver purchase. The T20 comes complete with a long list of advanced features. It is important that you read the manual to ensure that you get the most out of your new player. z http://www.iriver.
Before using the product Before using the product Safety Instructions For your safety, please read before use. Safety Instructions Product Product 05 For your safety, please read before use. Keep away from harsh environments including humid, dusty, and smoky areas. Do not drop or subject the device to impact. Keep the player away from strong magnets. Avoid contact with water and other liquids and dry immediately with a soft cloth should contact occur. Do not disassemble or modify.
Getting started 1 Chapter www.iriver.com 07 Components ......................................... 09 Locating the controls ............................. 10 Product ................................................................. 10 LCD Screen display .......................................................... 11 Connection/Installation ......................... 12 Connecting to the PC .......................................... 12 Safely Removing the player from the PC ...........
Getting started Getting started Components Accessories subject to change without notice and may vary from image shown. Locating the controls Your player may differ sightly from that shown in the illustrations.
Getting started Getting started Locating the controls Connection/Installation Connecting to the PC LCD Screen display 1. Push the USB lever and pull out the USB connection port as below picture and connect the player to the PC. 1. MUSIC Mode Time Play mode Hold Battery indicator Title name Progress bar Total playing time of selected song Playing time Volume level Sampling rate Bit rate File Type EQ 2. Turn on the player, “USB Connect” 4.
Getting started Getting started Connection/Installation Connection/Installation "Safely Remove Hardware" from the PC 1. Select the “Safely Remove Hardware” after clicking the “Safe To Remove Hardware” by right-clicking your mouse. 2. Click the “Stop” after selecting the device to remove. 3. Click “OK” after confirming the hardware to remove. 4. Click “Close” after confirming the Safely Remove Hardware message. (In case of Windows XP) Connecting the earphones 1.
Getting started Getting started Connection/Installation Connection/Installation When you connect T20 to your PC, iriver plus 2 will be started and all titles and Playlists in the library will be transferred to T20 In addition, you can create and manage your own Playlist. Charging the battery If the icon is displayed, the battery is out of power and you should charge the battery . 1. Connect the player to PC after push the USB lever and pull out the USB connection port as below picture. 2.
Getting started Connection/Installation Quick start 5. Select the components and click the [Next ] button. 6. Select the installation folder and click the [Install ] button. The installation process screen appears. 2 Chapter 8. Select the file types and then click the [Next ] button. 17 9. Click the [Finish ] button when the installation complete screen is displayed. Basic Usage ....................................... 19 Turning on/off the player .................................
Quick start Quick start Basic Usage Basic Usage Turning on/off the player 1 Selecting a music file Turning on the player Press the button to turn on the player. 1 During the music file playback, press , button to choose the desired music file. : to select previous music file : to select next music file Previous function mode will be displayed. Note If the player does not power ON, please replace your battery. 2 Turning off the player Press and hold the button. Turns off the player.
Quick start Basic Usage Basic operation Selecting the function mode 1 When powered on, press and hold button to display the function mode screen. Press , button to choose the desired function mode. Note 2 Press button to enter. Press button to cancel. MUSIC .................................................. 23 3 Chapter Playing a music file .............................................. 23 Selecting a music file ...................................
Basic operation Basic operation MUSIC MUSIC Playing a music file 1 Release HOLD switch, then press turn on the player. button to 5 Previous function mode will display. Skipping to previous/next file During the music file playback, press button to skip to the previous/next file : previous file 2 Press and hold button to display the function mode screen. Press , button to select [MUSIC] mode, then press button to enter. Previous music file will resume playback.
Basic operation Basic operation MUSIC MUSIC Selecting a music file 1 Changing playback mode Press and hold button to display the function mode screen. Press , button to select [BROWSER] mode, then press button to enter. 1 Use the , music file. , , : to move up : to enter the folder To exit file list screen, press 3 Press buttons to, select a 2 Press , then press button to choose the [SOUND], button. The [SOUND] sub-menu screen will be displayed.
Basic operation Basic operation MUSIC MUSIC Note The following the icons displayed to indicate playback mode. Normal playback Play all files in the player, then stop. Play all files in the current folder, then stop. Changing the sound EQ 1 Play a single file repeatedly. Repeat playback Play all files in the player repeatedly. Randomly play all files in the player, then stop. Shuffle playback repeatedly. Randomly play all files in the player repeatedly.
Basic operation Basic operation MUSIC MUSIC Downloading the music files 1. Push the USB lever and pull out the USB connection port as below picture and connect the player to the PC. (Refer to page 12) The iriver plus 2 will execute automatically. File can be deleted in the [SETTINGS - Advanced - Delete File]. Deleting a file on the player The (Refer to page 61) 1 2. Select the files on the PC to transfer to the player. Drag and drop to copy files to the desired location on the player.
Basic operation Basic operation MUSIC BROWSER BROWSER 4 Select a file to delete by using the , , button, then press button. : to move up : to enter the folder 5 Press press , , 1 Press and hold button to display the function mode Screen. Press , button to select [BROWSER] mode, then press button to enter. 2 File list screen is displayed on the LCD screen. : to move down : to exit the folder button to choose the [Yes], then button. File is deleted on the player.
Basic operation Basic operation * FM RADIO * Only for models including FM Radio function Listening to FM radio 1 Press and hold mode Screen. Press the , then press the * FM RADIO * Only for models including FM Radio function Searching for a FM radio frequency - Manual Scan button to display the function 1 button to select [FM RADIO], button to confirm. If PRESET is displayed, first press the exit PRESET mode. Press the station.
Basic operation Basic operation * FM RADIO * Only for models including FM Radio function Saving an FM Radio frequency - Manually 1 If PRESET is displayed, first press the exit PRESET mode. Press the station. 2 , button to * FM RADIO * Only for models including FM Radio function Saving an FM Radio frequency - Automatically 1 button to select your desired Press the button to display FM Radio function Selection screen. Press the , button to select [AUTO SAVE].
Basic operation Basic operation * FM RADIO RECORDING * Only for models including FM Radio function To record *FM station Deleting a channel 1 If PRESET is not displayed, first press the to enter PRESET mode. button 1 Press the button to display FM Radio function Selection screen. Press the , button to select [RECORDING], then press the button. The station will be recorded. 2 Pausing station recording 3 Press the Press the button to display FM Radio function Selection screen.
Basic operation Basic operation RECORDING RECORDING Recording voice 1 Recording from Line-In Press and hold the button to display function mode screen. Select the [RECORDING] by using the , button, then press button. 1 The recording select screen is displayed. 2 Select the [VOICE] by using the then press button. , The recording select screen is displayed. button, 2 The recording standby screen is displayed. 3 Press the 4 Press the Press Press button to begin recording.
Basic operation RECORDING Useful features Note for recording The recording will be stop if - the amount of recorded data exceeds the memory capacity of the player. - the battery is low. To play a recorded file - While Recording standby mode, press button to play recorded file. Previous recorded file will begin playing back. 1 2 Press and hold the button to display function mode screen. Select the [BROWSER] by using the , button, then press button.
Useful features Useful features Menu configuration Functions are subject to change with different firmware versions. Users can configure their own settings. SRS Setting User EQ EQ Select Play Mode Select Rec. Play Mode Backlight Timer Scroll Speed Tag Info. Language Name LCD Contrast Menu operation Enter Settings Menu 1 Press and hold the button to display the Mode screen. Press the , button to select [SETTINGS] mode. 2 Press the screen.
Useful features Useful features Menu operation Customizing the function settings (Menu) Set the menu functions 1 Select sub-menu using by , button, then press the button to enter sub-menu setting screen. 3 You can set, cancel or change sub menu setting by pressing the , , button . Sound 1. SRS Setting Sets the 3D sound effect. SRS, FOCUS, TruBass, and Boost are available. SRS : Adjust the SRS value. FOCUS : Adjust the sound resolution value. TRUBASS : Adjust the TruBass value.
Useful features Useful features Listening to music Listening to music Sound 3. EQ Select Select the EQ sound. Sound 5. Rec. Play Mode REC. Play Mode Select the play mode of recorded a file. You can select one of the following EQ types: NORMAL, CLASSIC, LIVE, POP, ROCK, JAZZ, U BASS, METAL, DANCE, PARTY, SRS, USER EQ 4. Play Mode Select Select the play mode.
Useful features Useful features Customizing the function settings (Menu) Customizing the function settings (Menu) Display 1. Backlight You can adjust the time that the Backlight stays on. The Backlight can be set to: , <5 SEC>, <10 SEC>, <30 SEC>, <1 MIN>, <5 MIN> or <10 MIN>. Display 3. Tag Info. While playing, you can display the information of music file by using ID3 Tag. You can set or . Off : Display track with file name z 2.
Useful features Useful features Customizing the function settings (Menu) Customizing the function settings (Menu) Display Display 5. Name 6. LCD Contrast You can input your name or custom text. Adjust the LCD screen contrast. The LCD contrast can be adjusted from <-5> to <+5>. 1 Select the character by using , button and press button to input the character. 2 To move the cursor in the name window, use , button. 3 To delete the character, press and hold button.
Useful features Useful features Customizing the function settings (Menu) Customizing the function settings (Menu) Recording 1. *FM Setting 3. Voice Detect You can set recording quality (, or ) when recording FM. The voice recording mode will automatically pause during silence. This is useful for recording over a long period of time to save memory. * Only for models including FM Radio function LEVEL : Set the relative level of sound needed to activate the recorder.
Useful features Useful features Customizing the function settings (Menu) Listening to music Recording 5. Line-In Volume 1. Power Off Timer You can control volume for recording from voice. Automatically turns the power off at the stop mode. <0> to <31> levels are available. Time range can be set from <1 MIN>, <2 MIN>, <3 MIN>, <5 MIN>, <10 MIN>, <20 MIN>, <30 MIN> or <60 MIN>. 6.
Useful features Useful features Customizing the function settings (Menu) Customizing the function settings (Menu) Timer Timer 3. Date & Time Set the current date and time. Set the alarm time. Press the Press the Press the Press the , button to adjust the date/time. button to accept the changes. 4. Alarm/*FM Rec. 57 5. Set Alarm , button to adjust the alarm settings. button to accept the changes. 6. *FM Rec.
Useful features Useful features Customizing the function settings (Menu) Customizing the function settings (Menu) Advanced 1. Resume ON : Playback will resume from the previous location in a song when the player is stopped or powered off. OFF : Playback begins from the first track after the player is stopped or powered off. 2. System Info. You can check the firmware version information, free space memory and total number of tracks. 59 Advanced 3.
Useful features Useful features Customizing the function settings (Menu) Customizing the function settings (Menu) Advanced Advanced 5. Study Mode While playing, press and hold current track set time ahead. 7. Load Default , button will skip the Time range can be set from , <3 SEC>, <10 SEC>, <20 SEC>, <30 SEC>, <60 SEC>, <120 SEC> or <180 SEC>. OFF : Study Mode function does not activate. 6. Delete File 61 When the Load Default is done, the player will be rebooted automatically. 8.
Customer Support 5 Chapter www.iriver.com 63 Firmware Upgrade ............................... 65 Format .................................................. 66 Troubleshooting .................................... 67 Specification ......................................... 68 Safety Information ................................ 69 FCC Certification ...................................
Customer Support Customer Support Firmware Upgrade Format Firmware Upgrade for T20 in iriver plus 2 Initializing T20 What is firmware ? It is the operating system that works in the T20. iriver provides you with the latest and best features through Firmware upgrade. You can choose manual or automatic upgrade function. For information on automatic upgrade,refer to the iriver plus 2 instruction manual. Please initialize T20 player in the following cases.
Customer Support Customer Support Troubleshooting Should any problem persist after you have checked these symptoms, consult your iriver dealer or contact support at www.iriver.com. Trouble Solution No Power. Check whether the HOLD switch on the player is ON (Switch to OFF position) Check the condition of the battery. Insert a fresh battery. No sound or distortion during playback. Check whether VOLUME is set to "0". Firmly connect the earphones. Check whether the plug is dirty.
Customer Support Customer Support Safety Information FCC Certification For Safety Avoid dropping or impacting the player. The player is designed to operate while walking or running, but dropping or excessively impacting the player may be cause damage. Avoid contacting the player with water. Damage to the internal parts of the player may occur if the player comes into contact with water. If your player gets wet, dry the outside with a soft cloth as soon as possible.
Memo Memo