User's Manual
40
Other Information Other Information
41
Adding Media to Library
1. When you run iriver plus 3 for the rst time, the Add
Media Wizard will start.
2. Follow the on-screen instructions on the PC to add
media les such as music and picture to the library.
Using iriver plus 3
2
Ripping Songs from a CD
1. Insert an audio CD into the CD drive and
run iriver plus 3.
2. In iriver plus 3, select the checkbox from
[Music-CD Drive] and click [CD Ripping] in
bottom left.
3. After ripping song, select the [All Music] to check
whether the ripped song is added to the library.
1
Using iriver plus 3
1. Connect the product to the USB jack of your PC
using the USB cable and run iriver plus 3.
2. Select the checkbox beside the le to transfer and
click
[ ]
.
3. The selected le starts to transfer and the progress
status is displayed in the Status window on bottom left.
4. Now you can nd the selected music in your library.
Using iriver plus 3
2
Using Windows Explorer
1. Connect the product to the USB jack of your PC
using the USB cable.
2. Copy the contents to proper folders as below.
▪ Text: W10/Text
▪ Music: W10/Music
▪ Picture: W10/Picture
▪ Video: W10/Video
1
Transferring Media to the iriver W10
Note
▪ The supported le formats are listed below.
Type
Flash
Game
Text
Music
Extension
SWF
SWF
TXT
MP3, WMA
OGG
Format
Flash le type
Frame rate
Audio
Adobe Flash Lite 2.1
Less than 15 frames/sec.
ADPCM or MP3
128Kbps, Less than 44.1 KHz
Unicode text, Local code text
8~320Kbps
Q1~Q10
Type
Picture
Video
Extension
JPG
AVI
WMA
Format
MPEG4 SP(Simple Prole), Less than 30 frames/sec. 2Mbps
QVGA(320X240)
Supports MP3 up to 320 Kbps, 44.1 Khz is recommended, CBR
WMV9 SP, Less than 30 frames/sec. 768 Kbps
QVGA(320X240)
Supports WMA up to 320 Kbps
Baseline JPG (Progressive JPG is not supported.)
Video
Resolution
Audio
Video
Resolution
Audio