Use and Care Manual

Braava jet™ Owner’s Guide 29

28 For Customer Care go to www.irobot.com/support

Tips for Best Performance

General Cleaning Tips

• For best results, use a Dry Sweeping Pad or vacuum to pick up dirt and dust

before running your robot with a Wet Mopping or Damp Sweeping Pad.

• To pause your robot during a cleaning cycle, press the CLEAN button.

To resume the cleaning cycle, press the CLEAN button again.

• Do not pick up and move your robot while it is cleaning – the robot will

end its cleaning run if you do.

• Always ﬁll Braava jet to the top with water and check for any air

bubbles before closing the tank cap.

• Only use water inside your robot. Cleaning solutions, even natural ones, can

clog the spray nozzle and break down the materials inside the robot.

• Your robot will only run with Braava jet Pads, which are speciﬁcally made

for the robot.

• Braava jet cleans best on smooth hard surfaces and may not perform as well on

uneven tiles, heavily waxed ﬂoors or rough surfaces like slate or brick which may

snag the cleaning pads.