User's Manual

Braava jet™ Owner’s Guide 27
EN
26 For Customer Care go to www.irobot.com/support
EN
Creating an Invisible Barrier
You can create an invisible barrier with the Virtual Wall
®
Mode so that the robot
will avoid cleaning part of a room or a dierent floor type.
• Begin with the robot powered o. When placing the robot, note that the invisible line
will be created in line with the back of the robot.
• To activate Virtual Wall Mode, start with a powered-o robot and press and hold the
CLEAN button until two blue lines appear on the top of the robot. The blue lines will
indicate that the Virtual Wall Mode has been activated.
• Once in Virtual Wall Mode, the robot will mark an invisible boundary in its internal
map, extending out to each side (see illustration). As the robot cleans your floor, it
will not go beyond the invisible line.
• Once the robot is in place, just press CLEAN to start the job.
• Virtual Wall Mode will turn o automatically when the robot completes its job. To
manually clear a Virtual Wall Mode cleaning cycle and turn o the robot, press
and hold the CLEAN button until all indicators turn o.
Cleaning Tip: You can also use
Virtual Wall Mode to divide a
larger room into smaller areas
to help Braava jet clean more
eciently.
How iRobot Braava jet™ Cleans