Use and Care Manual

8 Roomba

900 Series Owner’s Guide

Basic Operating

Instructions

Cleaning with Roomba

To wake up Roomba, press CLEAN once. Roomba will beep and

the CLEAN button will illuminate.

• To start a cleaning cycle, press CLEAN again.

» Roomba cleans an entire level of your home during one

cleaning cycle.

» If its battery gets low before ﬁnishing, Roomba returns to the

Home Base to recharge. After its battery has been recharged,

Roomba automatically returns to where it left o and completes

the cleaning cycle.

• To pause Roomba during a cleaning cycle, press CLEAN.

» To resume the cleaning cycle, press CLEAN again.

» To send Roomba back to the Home Base, press

(Dock)

• To end the cleaning cycle and put Roomba in standby mode,

press and hold CLEAN until Roomba’s indicators turn o.

Note: The actions listed above can also be managed from the iRobot

HOME app.

Important: Before using Roomba for the very ﬁrst time, you must activate

the battery. See Step 1: Activate Roomba on page 6 for instructions.