SDS

Safety Data Sheet
Date of Issue: April. 11, 2023 File No.: SZTD20230321WERC01
Page 3 of 12
3. Composition/ Information on Ingredients
Chemical Name
CAS No.
Weigh%
Lithium Nickel Cobalt manganese
oxide
182442-95-1
38.52
Carbon Black
1333-86-4
1.23
Polyvinylidene fluoride(PVdF)
24937-79-9
0.73
Graphite
7782-42-5
21.97
Carboxymethyl cellulose
9004-32-4
0.32
Styrene butadiene rubber
9003-55-8
0.42
Aluminum Foil
7429-90-5
4.42
Copper Foil
7440-50-8
8.95
Polyethylene
9002-88-4
2.32
Lithium hexafluorophosphate
21324-40-3
2.5
Ethylene carbonate
96-49-1
5.79
Dimethyl carbonate
616-38-6
8.31
Ethyl methyl carbonate
623-53-0
2.36
Polypropylene
9003-07-0
0.33
Poly(ethylene terephthalate)
25038-59-9
1.83
4. First Aid Measures
4.1 General Advice
First aid is upon rupture of sealed battery.
4.1.1 Eye contact
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep
eye wide open while rinsing. Remove contact lenses, if present and easy to do. Continue
rinsing. Do not rub affected area. Seek immediate medical attention/advice.
4.1.2 Skin Contact
Wash off immediately with plenty of water and soap for at least 15 minutes. Remove and
isolate contaminated clothing and shoes. Get medical attention if irritation develops and
persists.
4.1.3 Inhalation of Vented Gas
Remove to fresh air. Get medical attention immediately if symptoms occur. If not breathing,
give artificial respiration. If breathing is difficult, (trained personnel should) give oxygen.
4.1.4 Ingestion
Do NOT induce vomiting. Rinse mouth immediately and drink plenty of water. Never give
anything by mouth to an unconscious person. Call a physician or poison control center
immediately.
4.1.5 Self-protection of the first aider