Use and Care Manual

EN
5 For more information, visit global.irobot.com
Washing the Bin
Cleaning the Full Bin Sensors
Wipe the inner sensors with a
clean, dry cloth
Make sure bin is completely dry. Reinsert
filter and place bin back in the robot.
2
3
Important: Do not wash the filter.
Remove the filter before washing the bin.
Release the bin, remove the filter,
and open the bin door.
Remove and empty the bin.
1
1
Note:
Bin is not
dishwasher
safe.
Use a coin or small screwdriver
to remove the screw holding the
Edge-Sweeping Brush in place.
Remove the Edge-Sweeping Brush,
clean the brush and the brush post,
and then reinstall the brush.
Cleaning the Edge-Sweeping Brush
1
2
Cleaning the Front Caster Wheel
Pull firmly on the front wheel to remove it.
Remove any debris from inside the
wheel cavity.
Reinstall all parts when finished. Make
sure the wheel clicks back into place.
Important: A front wheel clogged with hair
and debris could result in damage to your
floor. If the wheel is not spinning freely after
you have cleaned it, please contact
Customer Care.
1
2
3
Wheel
Axle
Housing
Rinse the bin using
warm water.
2