Robot aspirateur Robot aspirador i1 / i3 / i4 Owner’s Guide Guide du propriétaire Guía del usuario
Safety Information Important Safety Information This safety guide includes safety information on Regulatory Models: RVD-Y1 SAVE THESE INSTRUCTIONS WARNING: When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS WARNING: To reduce the risk of injury or damage, read and follow the safety precautions when setting up, using and maintaining your robot.
WARNING: Indicates a hazardous situation that, if not avoided, could result in death or serious injury. EN CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury. NOTICE: Indicates a hazardous situation that, if not avoided, could result in property damage. GENERAL WARNING • Your robot is not a toy. Small children and pets should be supervised when your robot is operating. • Do not sit or stand on your robot or Home Base™.
• Do not use the charging station as a step. • Charge your robot only with the power supply provided. The provided power supply delivers safety extra low voltage corresponding to the input marking on the robot which is required to maintain safe operation. • To prevent the risk of your robot falling downstairs, ensure that the Home Base™ is placed at least 4 feet (1.2 meters) away from stairs. • Do not allow liquirds to get on or into the charging station.
About your Roomba® Robot Vacuum Top View Home Base Charging Station TM EN Faceplate Dust Bin and Filter RCON Sensor IR Sensor Window Light Touch Sensor Bin Release Button Bottom View Brush Caps Dirt Disposal Port* Dust Bin Brush Frame Release Tab Multi-Surface Brushes Cliff Sensor Edge-Sweeping Brush Charging Contacts Cliff Sensor Cliff Sensor Caster Wheel Floor Tracking Sensor Cliff Sensor *Select models only 1 For more information, visit global.irobot.
Using Your Roomba® Robot Vacuum Positioning the Home Base Charging Station TM Good Wi-Fi® Coverage Charging EN White Light Ring While Charging Solid White: fully charged Pulsing White: charging Pulsing Red: charging/low • Place the robot on the Home Base™ to activate the battery. 1.5 ft (0.5 m) both sides 4 ft (1.2 m) from stairs 4 ft (1.2 m) in front *Objects are not to scale.
Cleaning Troubleshooting Remove excess clutter from floors before cleaning. Use your robot frequently to maintain well-conditioned floors. EN • Y our robot will tell you something is wrong by playing an audio alert and turning the light ring indicator red. Press CLEAN for details. Further support and instructional videos are available in the iRobot HOME App. Just Press CLEAN Tap to Start / Pause / Resume Hold for 3 seconds to end a job • Y our robot will automatically explore and clean your home.
Accessories Dual Mode Virtual Wall® Barrier* Choose the mode to meet your needs: Virtual Wall Mode: When the switch is in the Virtual Wall position ( ), the device will create a linear barrier to block openings up to 10 feet (3 meters). EN Note: For best results, place at least 8 feet (2.5 meters) from the Home Base™. Use the Dual Mode Virtual Wall® barrier to keep the robot in the places you want cleaned — and out of the ones you don’t. It creates an invisible barrier that only the robot can see.
Care and Maintenance Care and Maintenance Instructions EN To keep your robot running at peak performance, perform the procedures on the following pages. There are additional instructional videos in the iRobot HOME App. If you notice the robot picking up less debris from your floor, empty the bin, clean the brushes, and clean or replace the filter if needed. Part Care Frequency Bin Wash bin as needed Filter Clean once a week (twice a week if you have a pet). Do not wash.
Cleaning the Full Bin Sensors 1 Washing the Bin Remove and empty the bin. Important: Do not wash the filter. Remove the filter before washing the bin. 1 2 2 Wipe the inner sensors with a clean, dry cloth 3 Wipe the bin door with a clean, dry cloth. Closed Door Release the bin, remove the filter, and open the bin door. Rinse the bin using warm water. Cleaning the Edge-Sweeping Brush 1 2 se a small screwdriver to loosen the U screw holding the Edge-Sweeping Brush in place.
EN Cleaning the Front Caster Wheel Cleaning the Multi-Surface Brushes 1 1 Pinch the brush frame release tab, lift the tab, and remove any obstructions. 2 Remove the brushes from the robot. Remove the brush caps from the ends of the brushes. Remove any hair or debris that has collected beneath the caps. Reinstall the brush caps. 3 Remove any hair or debris from the square and hexagonal pegs on the opposite side of the brushes.
Cleaning the Sensors and Charging Contacts sensors and charging contacts with a clean 1 Wipe, dry cloth. You can alternatively use a pad of melamine foam to remove built up debris on the robot and Home Base charging contacts. iRobot Customer Care USA & Canada If you have questions or comments about your Roomba® robot vacuum, please contact iRobot before contacting a retailer. EN You can start by visiting global.irobot.com for support tips, frequently asked questions and information about accessories.
Regulatory Information FCC Supplier’s Declaration of Conformity iRobot Corporation Roomba Model: RVD-Y1 EN Contains FCC ID: UFE-AXFY1 and contains IC: 6652A-AXFY1 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• 0 0 l~ n <:~==4=ft=/=l.=Sm=~ -il ID ID ID 4 ft / I.Sm Getready Position the charging station Plug in the charging station To start, you'll need your robot, charging station, and power cord. Set other accessories aside for later. Place charging station near an outlet in an area with good Wi-Fi coverage. Plug the power cord into the charging station, then into the wall. Wrap the cord bock so it won't get in the way of the robot as it comes and goes.
e m ID 0 0 Wake up Roomba• Download the iRobot HOME App Find more ways to connect Place your robot on the charging station by lining up the metal charging contacts. After a few minutes, a sound will let you know it's awake. Your Owner's Guide can be found in the Help section. The app also provides you with more ways to control your robot and continually improves your robot's cleaning performance with automatic software updates.
aobof Safety Information Important Safety Information This owner's guide includes information for Regulatory Model(s): RVD-Yl, ADE-Nl & & SAVE THESE INSTRUCTIONS WARNING: When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS WARNING: To reduce the risk of injury or damage, read and follow the safety precautions when setting up, using and maintaining your robot.
WARNING: Indicates a hazardous situation that, if not avoided, could result in death or serious injury. CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury. NOTICE: Indicates a hazardous situation that, if not avoided, could result in property damage. GENERAL & WARNING ~&& • Your robot is not a toy. Small children and pets should be supervised when your robot is operating. • Do not sit or stand on your robot or charging station.
• Do not use outdoors or on wet surfaces. • Do not allow liquids to get on or into the charging station. • Do not use charging station as a step. • Do not allow to be used as a toy. Close attention is necessary when used by or near children. • Use only as described in this manual. • Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center. • Do not handle plug or appliance with wet hands.
NOTICE • The battery pack must be removed from the robot before recycling or disposal. • For best results, only use the iRobot Lithium Ion Battery that comes with the robot. • Do not use non-rechargeable batteries. Use only the rechargeable battery supplied with the product. For replacement, purchase identical iRobot battery or contact iRobot Customer Care for alternative battery options. • Always charge and remove the battery from your robot and accessories before long-term storage.
Regulatory Information FCC Supplier's Declaration of Conformity iRobot Corporation Roomba Model: RVD-Yl • Reorient or relocate the receiving antenna. Contains FCC ID: UFE-AXFYl and contains IC: 6652A-AXFY1 • Connect the equipment into an outlet on a circuit d ifferent from that to which the receiver is connected. This device complies with part 15 of the FCC Rules.
WC#: 4747872 vA
aobof iRobot - Limited Warranty NOTE: This Limited Warranty does not affect your statutory rights under the laws relati ng to the sale of consumer product s. OVERVIEW iRobot ('We', 'Our', 'Us') warrants that, subject to the exclusions and limitations set out below, this Product (including batteries if applicable) shall be in good working order during the period of one (l) year from the dote of purchase (the 'Warranty Period').
