Use and Care Manual

5 For more information, visit global.irobot.com
Roomba
®
s Series Owner’s Guide 6
ENEN
Robot Care and Maintenance Instructions
To keep your robot running at peak performance, perform the
procedures on the following pages.
There are additional instructional videos in the iRobot HOME App.
If you notice the robot picking up less debris from your floor,
empty the bin, clean the filter and clean the brushes.
Part Care Frequency Replacement
Frequency*
Bin Wash bin as needed N/A
Filter Clean once a week (twice
a week if you have a pet).
Do not wash.
Every 2 months
Corner Brush Clean once a month Every 3 months
Full Bin Sensors Clean every 2 weeks N/A
Rear Caster Wheel Clean every 2 weeks Every 12 months
Multi-Surface
Brushes
Clean once a month
(twice a month if you
have a pet)
Every 12 months
Sensors and
Charging
Contacts
Clean once a month
N/A
Care and Maintenance
Note: iRobot manufactures various replacement parts and assemblies.
If you think you need a replacement part, please contact iRobot
Customer Care for more information.
* Replacement frequency may vary. Parts should be replaced if visible
wear appears.
Emptying the Bin
Lift the handle to remove the bin.
Press the bin lid release and
lift the bin.
1
2
Press the bin release button to
empty bin.
3
Cleaning the Filter
Open the filter door and
remove the filter by grasping
the tab.
Shake o debris by tapping
the filter against your trash
container.
Reinsert the filter and close
the filter door.
1
2
3
Important: The filter door won’t
close unless a filter is reinserted
correctly. Replace the filter every
two months.
Washing the Bin
Cleaning the Full Bin Sensors
Wipe the inner sensors with a
clean, dry cloth.
Make sure bin is completely dry. Then
reinsert filter and place bin back in
the robot.
Remove the filter and wash the bin,
or gently clean the bin to ensure
the sensor ports are clean.
2
3
3
Important: Do not wash the filter.
Remove the filter before washing the bin.
Release the bin, remove the filter,
and open the bin door.
Remove and empty the bin.
1
1
Note: Bin is not dishwasher safe.
Use a small screwdriver to loosen the
screw holding the Corner Brush in place.
Cleaning the Corner Brush
1
2
Rinse the bin using warm water.
2
Full Bin
Sensors
Pull to remove the Corner Brush.
Remove any hair or debris,
then reinstall the brush.