Use and Care Manual

7 For more information, visit global.irobot.com
Roomba
®
s Series Owner’s Guide 8
ENEN
Pinch the brush frame release tab,
lift the brush frame, and remove
any obstructions.
Remove the brushes from the
robot. Remove the brush caps
from the ends of the brushes.
Remove any hair or debris that
has collected beneath the
caps. Reinstall the brush caps.
Cleaning the Multi-Surface Brushes
Remove any hair or debris
from the square and
star pegs on the opposite
side of the brushes.
Remove the bin from the
robot and clear any debris
from the vacuum path.
Reinstall the brushes in the robot.
Match the shape of the brush pegs
with the shape of the brush icons in
the cleaning head module.
1
2
3
4
5
Cleaning the Rear Caster Wheel
Pull firmly on the rear caster wheel module to
remove it from the robot.
Press firmly on the wheel to remove it from its
housing (see illustration below).
Remove any debris from inside the wheel cavity.
Reinstall all parts when finished.
Make sure the wheel clicks back into place.
Important: A rear wheel clogged with hair and debris
could result in damage to your floor. If the wheel is not
spinning freely after you have cleaned it, please contact
Customer Care.
1
2
3
4
Wheel
Axle
Housing
Cleaning the Sensors and Charging Contacts
Wipe sensors, camera window and charging
contacts with a clean, dry cloth.
Important: Do not spray cleaning solution or water onto
the sensors or sensor openings.
1
Clean Base™ Automatic Dirt Disposal Care and
Maintenance Instructions
To keep your dirt disposal running at peak performance, follow these care
procedures:
Dock Part Care Frequency Replacement frequency
Bags
N/A
Bags should be replaced
when prompted by the LED
indicator / app
Charging Contacts
IR Window
Once every month
N/A
Blower Cover
inside canister
Once every month (remove
debris from blower cover)
N/A
Note: iRobot manufactures various replacement parts and assemblies. If you
think you need a replacement part, please contact iRobot Customer Care for
more information.