Use and Care Manual

IMPORTANT SAFETY INSTRUCTIONS
When using the ironing center, basic precautions should always be followed, including the
following:
Read all instructions.
Use ironing center only for intended use.
Never yank cord to disconnect from outlet; instead grasp plug and pull to disconnect.
To reduce the risk of electrical shock, do not disassemble or attempt to repair the ironing
center, call a qualified serviceperson for examination or repair. Incorrect reassembly or
repair could cause a risk of fire, electrical shock, or injury to persons when the ironing center
is used.
Close supervision is necessary for any appliance being used by or near children.
To reduce the likelihood of circuit overload, do not operate another appliance on the same
circuit.
SAVE THESE INSTRUCTIONS
Congratulations on purchasing your IRON-A-WAY built-in ironing center.
Since 1956, those who demand quality and convenience have sought out
IRON-A-WAY. Each ironing center is handcrafted and utilizes time-
tested features that insure many, many years of satisfied use. Every
time you open the door and lower the ironing board, you will be pleased
with your decision to include an IRON-A-WAY into your plans.
Demanding more and not being satisfied with less defines our customer.
Thank you for choosing IRON-A-WAY.
PARTS AND FEATURES
Refer to your parts diagram included separately with each ironing center. If replacement diagram is misplaced, please
contact our customer service department.
IRON-A-WAY Built-In Ironing Center
Use and Care Guide
1

Summary of content (6 pages)