Use and Care Manual

IRONING CENTER CARE
Ordering Replacement or Service Parts
Contact our customer service department for replacement or service parts. Refer to your parts diagram for appropriate
part numbers.
Ordering Replacement Cover and Pad
To order a replacement ironing board cover and pad, simply do one of the following:
1. Complete and mail the enclosed reorder envelope.
2. Call Customer Service.
3. Place order on our website.
Installing a Replacement Cover and Pad
Note: Before removing the existing cover and pad, examine how it is installed since this will be helpful when
installing your replacement cover and pad.
1. Lower the board into the ironing position.
2. Place the pad on board extending the edges of the pad slightly over the tapered end of the ironing board.
3. Place the cover on top of pad and extend the edges of the cover approximately 1 ½” over the tapered end of
ironing board and slightly tighten drawstrings at the lower end of the cover to partially secure the cover and pad.
4. Fold the excess cover and pad material at the back of the ironing board over and around the end of the board.
Note: For all 42” ironing boards, a fold of approximately 6” is necessary to align the first and second sets of eyelets
for lacing.
5. Place your hand over the tapered end of ironing board to keep cover and pad in place. Then raise the ironing
board back into the cabinet.
6. While firmly holding with one hand the tapered end of the ironing board, alternately tighten the drawstrings until
the cover fits tight.
7. Thread the ends of the drawstrings through the eyelets at the lower end of the cover and tie securely.
Note: For lacing the 46” ironing board, use the first and third sets of eyelets.
Installing or Changing the Light Bulb
If electric model includes a built-in spotlight fixture, use a maximum 30-watt light bulb. Recommended bulb is a 30R20
with standard base and a 2 ½” bulb diameter.
Cabinet Touch-ups
Need to touch-up your cabinet following installation?
Touch-up Kits are available by contacting our customer service department. These kits are great for light touch-ups for
slight nicks or marks caused during installation of ironing center.
Irons
The hot iron storage area has been designed to accept the majority of steam/dry irons available at retail, including many
premium models. However, due to manufacturers continuing changing their model numbers and the size and shape of
their irons, it is not possible to include with these instructions a comprehensive list of irons that fit into the hot iron storage
area.
Swivels
If your ironing center includes a swiveling ironing board you may periodically wish to use a Teflon multi-use lubricant
spray so your ironing board keeps turning like new. With the ironing board in an upright position lightly spray lubricant into
the two openings containing the swivel springs. After spraying, lower ironing board and rotate left and right until lubricant
is fully worked into and between the swivel plates.
IRON-A-WAY Built-In Ironing Center
Use and Care Guide
2