Use and Care Manual

IRONING CENTER USE
Position the Ironing Board
1. Open door as widely as possible.
2. With one hand, hold the board in an upright position and with the other hand raise the ironing board retainer to
an upright position releasing the ironing board.
3. With the ironing board released, hold onto the nose of the board, pulling it forward, lowering it to the normal
ironing position.
Adjusting Ironing Board Height
Model A-46 (Without Swivel)
Lowering the Ironing Board.
1. While standing along side the ironing board, with one hand, hold near the nose of the board and with the
other, hold the back of the board between the sides of the cabinet.
2. Slightly raise the nose of the ironing board tilting it upward and then slightly raise the back of the ironing
board out of its secured position.
3. Gently lower the back of the ironing board to the lower position while keeping the nose of the ironing board
in an upward tilting position.
4. With the back of the ironing board in the lower position, release your hand and place it on the opposite
side of the board across from the hand remaining on the ironing board.
5. Keeping the board in a slightly tilted position, remove the hand that had first been placed near the nose of
the ironing board and gently push on the double legs under the ironing board. The direction of the push
will be slightly upward and toward the ironing board cabinet. This will allow the leg to release from its
secured position from the bracket located at the bottom of the cabinet.
6. Gently return the ironing board to a horizontal position.
Returning the Ironing Board to the Upper Position.
1. Grasping near the nose of the ironing board with one hand and the back of the ironing board between the
sides of the cabinet with the other hand.
2. Gently lift the back of the ironing board up the side bracket and return it to the upper secured position.
3. Gently lift the nose of the ironing board to allow the leg underneath the ironing board to return to the
secured position in the bracket located at the bottom of the cabinet.
Models with Swivel Ironing Board
Raising the Ironing Board
1. Put the ironing board in a straight (horizontal) position.
2. With one hand, hold the front of the ironing board and with the other, place your thumb on the rear of the
ironing board while grasping the axle rod with your fingers.
3. To raise, lift the axle rod and slide it to the back of the side bracket by slightly raising the nose of the
ironing board.
4. Lift the back of the ironing board to the upper level and lock into position.
IRON-A-WAY Built-In Ironing Center
Use and Care Guide
3