Installation Instructions

ManualsBrandsIron-A-Way ManualsIroning15 Inch Ironing Center with 42 Inch Ventilated Board, Hot Iron Rest, Storage Shelves, Hot Iron Storage, Garment Bar, Adjustable Swivel, 60 Minute Motor Timer, Spotlight, Built-In Safety Switch, and UL Listed: Mirror Door, Left Hinge

IRONING CENTER

INSTALLATION MANUAL

SUPPLIED PARTS

Quick Reference

SUPPLIES NEEDED

SWIVEL MODELS

AE-46 ANE-46 AE-42 ANE-42 UD-42

RECESSED INSTALLATION

#10 x 1 1/2” Wood Screws (2)

#14 x 2 1/2” Phillips Screws (2)

SURFACE MOUNT INSTALLATION

#14 x 4” Wood Screws (2)

NON-SWIVEL MODELS

E-46 NE-46 E-42 NE-42 IAW-42

RECESSED INSTALLATION

#10 x 1 1/2” Wood Screws (4)

SURFACE MOUNT INSTALLATION

#14 x 4” Wood Screws (2)

IAW-42 ONLY

#14 x 2 1/2” Wood Screws (2)

Swivel Models

pg. 2 | Pre-Installation

pg. 3 | Recessed Mount

pg. 4 | Surface Mount

pg. 7 | Electrical

Non-Swivel Models

pg. 2 | Pre-Installation

pg. 5 | Recessed Mount

pg. 6 | Surface Mount

pg. 7 | Electrical

Carpenter’s Level

Tape Measure

Utility Knife

Drill

1/8” Drill Bit

3/16” Drill Bit (Surface Mount Installation)

Small Flat Head Screwdriver

Safety Glasses

2 x 4 Cross Support Cleat (Recessed Installation)

2 x 4 Brace (Surface Mount Installation)

Optional:

Stud Finder

1/4” Nut Driver

Iron-A-Way

1-800-536-9495

support@ironaway.com

220 W. Jackson

Morton, IL 61550

Summary of content (8 pages)

PAGE 1
IRONING CENTER INSTALLATION MANUAL SUPPLIED PARTS SUPPLIES NEEDED Carpenter’s Level Tape Measure Utility Knife Drill 1/8” Drill Bit 3/16” Drill Bit (Surface Mount Installation) Small Flat Head Screwdriver Safety Glasses 2 x 4 Cross Support Cleat (Recessed Installation) 2 x 4 Brace (Surface Mount Installation) SWIVEL MODELS AE-46 ANE-46 AE-42 ANE-42 UD-42 RECESSED INSTALLATION #10 x 1 1/2” Wood Screws (2) #14 x 2 1/2” Phillips Screws (2) SURFACE MOUNT INSTALLATION #14 x 4” Wood Screws (2) NON-SWIVEL MODE
PAGE 2
PRE-INSTALLATION Please follow these Pre-Installation steps to ensure your ironing board will work properly in the installation location you have selected. STEP ONE: Ironing Board Clearance Begin by ensuring your desired installation location has adequate space for your selected model. Choose Recessed Mount or Surface Mount. SWIVEL MODELS | FIG 1.
PAGE 3
ADJUSTABLE SWIVEL RECESSED MOUNT INSTALLATION Models | AE-46, ANE-46, AE-42, ANE-42, UD-42 *** PLEASE NOTE: Under no circumstances should the ironing board and/or the support mechanism be removed from the cabinet during installation.
PAGE 4
ADJUSTABLE SWIVEL SURFACE MOUNT INSTALLATION Models | AE46, ANE-46, AE-42, ANE-42, UD-42 *** PLEASE NOTE: Under no circumstances should the ironing board and/or the support mechanism be removed from the cabinet during installation. STEP ONE: Locate Stud & Pre-Drill Holes Locate and mark stud on wall. Cut two 2 x 4 braces (not provided) to the desired mounting height to use for bracing the unit for installation. Using 3/16” drill bit, pre-drill hole into the center of the top cleat of cabinet (FIG 3.
PAGE 5
NON-SWIVEL RECESSED MOUNT INSTALLATION Models | E-46, NE-46, E-42, NE-42 *** PLEASE NOTE: Under no circumstances should the ironing board and/or the support mechanism be removed from the cabinet during installation.
PAGE 6
NON-SWIVEL SURFACE MOUNT INSTALLATION Models | E46, NE-46, E-42, NE-42, IAW-42 *** PLEASE NOTE: Under no circumstances should the ironing board and/or the support mechanism be removed from the cabinet during installation. STEP ONE: Locate Stud & Pre-Drill Holes Locate and mark stud on wall. Cut two 2 x 4 braces (not provided) to the desired mounting height (determined in Step Three of Pre-Installation) to use for bracing the unit during installation.
PAGE 7
ELECTRICAL INSTALLATION Models | AE-46, E-46, AE-42, E-42, UD-42 ATTENTION: TURN OFF POWER AT SERVICE ENTRANCE BEFORE INSTALLING, WIRING, OR SERVICING THIS PRODUCT ITEMS TO NOTE Instructions for electrical models ONLY DO NOT attempt to install your own outlet or electrical hook-up in non-electrical models NE-46, NE-42, ANE-46, ANE-42, or IAW-42. This can cause an electrial hazard and will void the warranty of your unit.
PAGE 8
Still have questions? We’re here to help! 1-800-536-9495 support@ironaway.