Installation Guide

4. INSTALL UNIT INTO WALL
Begin installation by carefully lifting
unit into the wall opening.
Make sure the cabinet is plumb and
level. If needed, add shims to help
unit t space.
5. ATTACH CABINET TO STUDS
Using the pre-drilled holes in top of
cabinet, attach unit to studs with two
#10 x 1
1/2
” screws for top installation.
Finish installation by inserting the
#14 x 2
1/2
” screws in bottom
pre-drilled holes.
FOR MODELS E46 & E42:
Please refer back to electrical
instructions to complete the
electrical part of your installation.
6. FINISH INSTALLATION
7. INSTALLATION COMPLETE!
Cabinet is now fully installed! If desired,
decorative trim or molding may be
added to cover an irregularities in the
wall.
Example shown with studs
to illustrate mounting.
MODELS E46 & E42:
Refer to electrical instructions on
pg. 17 before proceeding to next step.
MODELS NE46 & NE42:
Proceed to next step.
DO NOT attempt to install your own
electrical to unit. Warranty is voided if
independent electrical is installed.
14 - Non-Swivel Installation