Use & Care Guide
TABLE OF CONTENTS WARRANTY INFORMATION.......................................pg.3 IRONING CENTER CARE............................................pg.4 REPLACEMENT PARTS................................................pg.5 - Ordering a new cover & pad - Replacement parts IRONING CENTER USE...............................................pg.6 IRONING TIPS............................................................pg.
WARRANTY ONE-YEAR LIMITED WARRANTY from the date of purchase is placed on all defective parts returned to the factory for replacement excluding light bulbs, installed units, finished or stained doors, and the cover & pad set. KEEP THIS BOOK AND YOUR SALES SLIP FOR FUTURE REFERENCE Write down the following information about your ironing center to better help you obtain assistance if needed.
IRONING CENTER CARE Installing or Changing the Light Bulb For electrical models with a built-in spotlight fixture, use a maximum 30-watt bulb. We recommend a 30R20 with standard base and a 21/2” bulb diameter. Cabinet Touch-Up Kits Need to touch-up the paint on your cabinet following installation? Touch-Up Kits can be obtained by contacting our customer service department at 1-800-536-9495. These kits are great for touching up small nicks or marks on the cabinet that came about in the installation process.
REPLACEMENT PARTS Ordering a Replacement Cover & Pad If you are in need of a new cover and pad set for your ironing board, simply choose one of the following: Mail: Complete and mail the enclosed reorder form. Phone: Call 1-800-536-9495 to speak to customer service. Web: Place an order online a ironaway.com Replacement or Service Parts If you are in need of any replacement or service parts, please download a diagram for your unit at ironaway.com to locate the correct part number.
IRONING CENTER USE Using Your Fixed Position Ironing Board 1. Open the door as wide as possible 2. (Fixed position only) With one hand, hold the ironing board in an upright position and with the other hand, raise the board retainer (fixed position only) to an upright position, releasing the board. 3. Hold onto the nose of the board, pulling it forward, lowering it to the normal ironing position. Using Your Adjustable Swivel Board Lowering Your Ironing Board 1. Open the door as wide as possible 2.
Ironing with Your Electrical Features Models with a Cord Cover 1. Remove the electrical cover that is resting on the bottom storage shelf to expose the outlet on the bottom of the raceway. Your iron plug and cord will be placed through the small hole in the shelf, allowing the plug to connect to the outlet. 2. Plug the iron cord into the outlet. 3. Determine a convenient length (approx. 48”) of electric cord and leave this amount outside the opening in the bottom storage shelf.
Using Your Hot Iron Rest If your ironing center has a hot iron rest feature, use the rest plate to hold the iron while you adjust your garment. The hot plate of the iron faces the back of the cabinet.
IRONING TIPS Preventing Excessive Wrinkles in Garments To prevent excessive wrinkles after laundering garments, use the following ironing tips: - Always follow recommended laundry instructions attached to individual garments. - Do not overload the washer or dryer. - Always wash/dry light and heavy articles separately. Mixing can cause wrinkles in both the washing and drying cycles. - Keep clothing items spaced in closet and try not to crowd garments after ironing.
220 W. Jackson St, Morton, IL 61550 1-800-536-9495 or info@emergacenter.
