Manual

11
8. Push the magazine floorplate release.
9. The floorplate will open from the downward pressure of the loaded
magazine.
10. The magazine spring and follower will drop with the floorplate allowing the
loaded rounds to be released.
11. Remove the rounds.
12. Re-install the follower and spring inside the magazine box.
13. Close the floorplate ensuring the magazine floorplate release snaps out
locking the floorplate.
Operating Under Extreme Conditions
1. Clean the rifle inside at room temperature, if possible.
2. Apply a light coat of oil/lubricant to the bolt body only.
3. Do not allow oil/lubricant to contact the face of the bolt.
4. Keep the rifle and ammunition dry if possible.
5. Remove the bolt and visibly inspect the bore before firing.
6. The bore should be free of foreign objects and any liquid.
Disassembly (Field Stripping)
1. Point the rifle in a safe direction.
2. Engage the Safety.
3. Unload the rifle, visually and physically inspect the chamber.
4. Remove the bolt assembly.