Manual

25
SUPPRESSOR INSTALLATION
WARNING: Confirm that weapon is unloaded and on Safe (Refer to your
weapon’s Operator Manual for weapon safety features and handling
instructions.) With muzzle pointed in a safe direction remove the magazine, lock the bolt
to the rear and inspect chamber and receiver verifying the weapon is clear.
1. OPEN Locking Ring
• Hold the Suppressor body in your left hand
with the front facing away.
• Depress the Ratchet Stop Tab with thumb.
• Using the right hand, rotate the Locking
Ring (Counter Clockwise) until it stops.
2. Attach
• Orient Suppressor with serial number stamp on
top and slide over the Compensator/Adapter.
• Rotate Suppressor until the Suppressor drops into
the intercept notch stopping rotation.
• Pull Suppressor firmly onto the weapon until fully
seated on the Compensator/Adapter.
• Note: If the mating surfaces are carbon fouled,
slap the front of the Suppressor with your palm to
make sure the Suppressor is fully seated.
3. Rotate and Lock
• Rotate Locking Ring clockwise and TIGHTEN
FIRMLY by hand (approx. ½ turn) until it can be
rotated no further.