Manual

2. Open Locking-Ring

Hold Suppressor body with your left hand pulling Suppressor lightly into the weapon.

Grasp the Locking Ring firmly and press your knuckle against the Ratchet Stop, dis-

engaging it. Then break the Locking Ring loose by quickly rotating it counter-

clockwise. Now relax your grip and continue rotating the ring until it stops.

3. Firmly pull Suppressor forward, twisting

left and right, to remove it from the

Compensator/Adapter.

MAINTENANCE

CLEANING

NOTE: The Suppressor is a precision instrument having a tight fit between the bearing

surfaces. The Compensator/Adapter should be cleaned to remove carbon and copper

fouling deposits from bearing surfaces.

The FA762SS Sound Suppressor and Flash Hider/Adapter mating surfaces should be

cleaned after firing using the following procedure:

1. Brush and/or scrape carbon & copper residue from Suppressor mounting surfaces

and Compensator/Adapter. Take care to orient the parts so carbon does not fall into

the weapon bore, or into the Suppressor body.