Manual

28
2. Copper remover/gun cleaning solvent may be used to remove fouling from the
Compensator/Adapter.
NOTE: Do not allow solvent(s) to flow into the Suppressor body.
COMPENSATOR / ADAPTER
FA762SS
COMPENSATOR/ADAPTER CLEANING
THE SUPPRESSOR YOU ARE USING IS A PRECISION UNIT; IT FITS WITH
MINIMUM CLEARANCE AT THE BEARING SURFACES. REATTACHMENT
WILL BE DIFFICULT IF THESE SURFACES ARE CARBON FOULED. SCRAPE
AND BRUSH THESE SURFACES AND THE MATING AREAS IN THE
SUPPRESSOR AND YOU WON’T HAVE ANY ATTACHMENT PROBLEMS.
Intercept Notch
Bearing Surfaces
to be cleaned