Manual

29
OPERATOR USE NOTES
1. ZEROING: Confirm zero both with and without Suppressor attached. SureFire
Suppressors have minimal impact shift but this can very from weapon to weapon.
2. As a rule all Suppressors have flash on the first round fired because of air inside the
Suppressor mixing with the combustion gases. After the first round most of the flash
is eliminated due to the Suppressor being filled with inert gases.
3. “WET” FLASH SUPPRESSION: To minimize first round flash, detach Suppressor
and pour water into the rear of detached Suppressor. Rotate, spreading the water
inside the Suppressor. Hold the Suppressor muzzle down draining all water out the
front. There will be the correct amount of water left inside the suppressor when water
stops draining.
4. If water is unavailable, saliva can be spit into the front of the Suppressor.
WARNING: Under no circumstances should the Suppressor be filled with grease,
oil, or any other material before use. Placing a foreign substance in the unit could alter
the path of the projectile and/or cause the weapon to malfunction.
CAUTION: As with all weapons, eye protection is recommended when firing you rifle
with or without the Suppressor attached.
Mirage Wraps