Manual

6
To engage the safety, place the switch in the “S” position.
When engaged in the “S” position provides protection against accidental or
unintentional discharge.
Always engage the safety before handling, loading or unloading the rifle.
WARNING: If the weapon fires unintentionally when the safety is
disengaged (In “F” position) immediately clear the weapon and return to
Armory for repair.
Bolt Assembly
The bolt assembly feeds and chambers the round.
To Remove Bolt Assembly:
1. Point the rifle in a safe direction.
2. Engage the safety.
3. Raise the bolt handle.
4. Press the bolt stop release.
5. As you press the bolt stop release, slide the bolt assembly to the rear.