Manual

Day Optic Sight

How To Attach Day Optic Sight:

1. Before mounting the Day Optic Sight w/ Rings, clean/lubricate the threads

of each scope ring mounting bolt.

2. Ensure smooth movement of each mounting nut and mounting claw.

NOTE:

There are several mounting slots on the Picatinny Rail scope mount. Select the

set of slots which provide the proper eye relief. Once a set of slots is chosen, the

same set should always be used in order to retain zero.

Ensure mounting surface of base is free of dirt, oil and grease.

1. Set each ring bolt spline in the selected slot.

2. Slide the rear mount claw against the base while pushing the claw and

scope forward. Finger tighten the mounting ring nut.

3. Slide the front mount claw against the base while pushing the claw

forward. Finger tighten the mounting ring nut.

4. Utilizing the ½” socket and the Seekonk torque wrench, torque the rear

mounting ring nut.

5. Utilizing the ½” socket and the Seekonk torque wrench, torque the front

mounting ring nut.

6. After checking your zero re-torque the rear and front mounting ring nuts.