Installation Guide

STEP 2: CHOOSE POSTS
helpful to drop each post at the appropriate stake to avoid
LINE POST CORNER POST END/GATE POST
STEP 3: POST, GATE & PANEL INSTALLATION
wood (to protect the post) hammer the post into the ground approximately 2” so the post is 24“ below ground
Tip: Measure between 21” - 24” from the
bottom of the post and mark with chalk
or a temporary marker to ensure proper
height placement. The mark on the post
should align with ground level once post
is in ground.
Warning: Depth of post in ground
is determined by grade and soil.
Looser soil will require a deeper
hole.
21” - 24”