BX Series Specs

© 2019 IronRidge, Inc. All rights reserved. Version 1.0
Chassis
Accessories
Datasheet
Design Assistant
Go from rough layout to fully
engineered system in minutes.
Go to IronRidge.com
Resources
10° Chassis
Ballasted mounting for 10
degree tilt angle.
• Max load spreading design
• Fully encloses ballast
• 360 degree drainage
Bottom Clamp
Combines with Top Clamp
to up structural connection.
• Secures below module
• One-tool attachment
• Mill aluminum 6000 series
5° Chassis
Ballasted mounting for 5
degree tilt angle.
• Max load spreading design
• Fully encloses ballast
• 360 degree drainage
Top Clamp
Combines with Bottom Clamp
for top-bottom module grip.
• Secures above module
• One-tool attachment
• Mill aluminum 6000 series
Cable Tie
Complete wire management
with weatherproof ties.
• UV stabilized polyamide
• 12” length, bundle of 100
• Black nish
Create mounting platform
for inverters.
• Chassis, XR10 rail, hdw
• Up to 4’ inverter base
• Raises inverter off deck
String Inverter Mount Kit
Grounding
8” Mod Bonding Jumper
Bond adjacent modules in the
array.
• Press-on installation
• Tin-plate copper wire
• Factory crimped connection
38” Row Bonding Jumper
Complete row-to-row bonding
in the array.
• Press-on installation
• Tin-plate copper wire
• Factory crimped connection
MLPE Mounting Hardware
Optional mounting hardware
for MLPE devices.
• Cap screw and cage nut
• 5/16” socket install
• Stainless steel 300 series
Add anchors to ballasted
system.
• Includes hardware
• For ballast-attached hybrid
• Uses locally-sourced strut
Flat Roof Attachment Kit
Manage wires underneath
module and Chassis ange.
• Clips to module & Chassis
• UV stabilized polyamide
• Black nish
Edge Clip Cable Tie
PV Mod Grounding Lug
Connect arrays to
equipment ground.
• Low prole
• Mounts to module frame
• One per continuous array
Tech Support
Get help when you need it, regarding
installation, design, and anything else.
Call 1-800-227-9523