BX Series Installation Guide
Table Of Contents
- DISCLAIMER
- RATINGS
- MARKINGS
- Checklist
- OVERVIEW
- INSTALLATION STEPS (QUICK GUIDE)
- 1. MARK LAYOUT
- 2. PLACE CHASSIS
- 3. MOUNT MLPE (OPTIONAL)
- 4. LAY BALLAST
- 5. ANCHOR SYSTEM (OPTIONAL)
- 6. INSTALL MODULES
- 7. COMPLETE BONDING
- 8. PV Module GROUNDING LUGS
- string INVERTER MOUNTING KIT (OPTIONAL)
- ELECTRICAL DIAGRAM
- MODULE COMPATIBILITY
BX SYSTEM INSTALLATION MANUAL - 10©
2019 IRONRIDGE, INC. VERSION 1.0
ELECTRICAL DIAGRAM
MODULE COMPATIBILITY
The BX System may be used to ground and/or mount a PV module complying with UL 1703 only when the specic
module has been evaluated for grounding and/or mounting in compliance with the included instructions. Unless otherwise
noted, “xxx” refers to the module power rating and both black and silver frames are included in the certication.
MAKE MODELS
Amerisolar
Modules with 35, 40 and 50mm frames and model identier ASbYxxxZ; where "b" can be 5 or 6; "Y" can
be M, P, M27, P27, M30, or P30; and "Z" can be blank, W or WB.
Astronergy Solar
Modules with 35, 40, and 45mm frames and model identier aaSM66yyPzz-xxx; where “aa” can be CH
or A; “yy” can be either 10 or 12; and “zz” can be blank, HV, (BF) or (BL).
Auxin
Modules with 40mm frames and model identier AXN6y6zAxxx; where "y" can be M or P; "z" can be 08,
09, 10, 11, or 12; and "A" can be F or T.
Axitec
Modules with 35 and 40mm frames and model identier AC-xxxY/aa-ZZ; where "Y" can be M or P; "aa"
can be 125 or 156; and "ZZ" can be 54S, 60S or 72S.
Boviet
Modules with 40mm frames and model identier BVM66aaYY-xxx; where "aa" can be 9, 10 or 12; and
"YY" is M or P.
BYD
Modules with 35mm frames and model identier BYDxxxAY-ZZ; where "A" can be M6, P6, or PH; "Y"
can be C or K; and "ZZ" can be 30 or 36.
Canadian Solar
Modules with 30, 35 and 40mm frames and model identier CSbY-xxxZ; where “b” can be 1, 3 or 6; “Y”
can be H, K, P, U, V, or X; and “Z” can be M, P, MS, PX, M-SD, P-AG, P-SD, MB-AG, PB-AG, MS-AG, or
MS-SD.
CertainTeed
Modules with 35 and 40mm frames and model identier CTxxxYZZ-AA; where "Y" can be M or P; "ZZ"
can be 00,01, 10, or 11; and "AA" can be 01, 02 or 03.
CSUN
Modules with 35 and 40mm frames and model identier YYxxx-zzAbb; where "YY" is CSUN or SST; "zz"
is blank, 60, or 72; "A" is blank, P or M; and "bb" is blank, BB, BW, or ROOF.
Ecosolargy
Modules with 35, 40, and 50mm frames and model identier ECOxxxYzzA-bbD; where "Y" can be A, H,
S, or T; "zz" can be 125 or 156; "A" can be M or P; "bb" can be 60 or 72; and "D" can be blank or B.
ET Solar
Modules with 35, 40, or 50mm frames and model identier ET-Y6ZZxxxAA; where "Y" is P, L, or M; "ZZ"
is 60 or 72; and "AA" is WB, WW, BB, WBG, WWG, WBAC, WBCO, WWCO, WWBCO or BBAC.