Flashfoot2 Tech Brief

Tech Brief

The Strongest Attachment in Solar

IronRidge

FlashFoot2

raises the bar in solar roof

protection. The unique water seal design is both

elevated and encapsulated, delivering redundant layers

of protection against water intrusion. In addition, the

twist-on Cap perfectly aligns the rail attachment with the

lag bolt to maximize mechanical strength.

FlashFoot2

Twist-On Cap

FlashFoot2

’s unique Cap design encapsulates

the lag bolt and locks into place with a simple

twist. The Cap helps FlashFoot2

deliver

superior structural strength, by aligning

the rail and lag bolt in a concentric

load path.

Single Socket Size

A custom-design lag bolt allows

you to install FlashFoot2

with

the same 7/16” socket size

used on other Flush Mount

Three-Tier Water Seal

FlashFoot2

’s seal architecture utilizes

three layers of protection. An elevated

platform diverts water away, while a stack of

rugged components raises the seal an entire

inch. The seal is then fully-encapuslated

by the Cap. FlashFoot2

is the rst solar

attachment to pass the TAS-100 Wind-Driven

Water-Shedding Design

An elevated platform diverts water

away from the water seal.

PAGE 1
Tech Brief FlashFoot2 ® The Strongest Attachment in Solar IronRidge® FlashFoot2® raises the bar in solar roof protection. The unique water seal design is both elevated and encapsulated, delivering redundant layers of protection against water intrusion. In addition, the twist-on Cap perfectly aligns the rail attachment with the lag bolt to maximize mechanical strength. Twist-On Cap FlashFoot2®’s unique Cap design encapsulates the lag bolt and locks into place with a simple twist.
PAGE 2
Tech Brief Installation Features B A Alignment Markers Quickly align the flashing with chalk lines to find pilot holes. C B Rounded Corners Makes it easier to handle and insert under the roof shingles. A Benefits of Concentric Loading Traditional solar attachments have a horizontal offset between the rail and lag bolt, which introduces leverage on the lag bolt and decreases uplift capacity.