Manual

© 2021 IRONRIDGE, INC. VERSION 3.1 FLUSH MOUNT INSTALLATION MANUAL - 4
COMPONENTS
BONDING HARDWARE TORQUE VALUES
Please refer to each attachment's individual section for full details
on all torque values and instructions.
☐ Bonded Splice Screws (5/16" Socket): 20 in-lbs
☐ Universal Fastening Object (7/16" Socket): 80 in-lbs
☐ Rail Grounding Lug Nut (7/16" Socket): 80 in-lbs
☐ Grounding Lug Terminal Screws (7/16" Socket): 20 in-lbs
☐ Module Grounding Lug Nut (3/8" Socket): 60 in-lbs
☐ Grounding Lug Terminal Screws (1/2" Socket): 20 in-lbs
☐ Expansion Joint Nuts (7/16" Socket): 80 in-lbs
☐ Microinverter Kit Nuts (7/16" Socket): 80 in-lbs
☐ Frameless Module Kit Nuts (7/16" Socket): 80 in-lbs
☐ 3/8" Bonding Hardware Nuts (7/16" Socket): 250 in-lbs
COMPONENTS
Bonded SpliceXR Rail
UFO and Stopper
Sleeve
CAMO
Rail Grounding Lug
8" Bonding Jumper
Expansion Joint
Wire Clip
End Cap
QMPV QBOX
3/8" Bonding
Hardware
Microinverter Kit
Frameless Module Kit
Frameless
End/Mid Clamp
QMPV Classic
Conduit Comp Mount
QMPV Composition
Conduit Penetration
QMPV Tile Conduit
Mount
QMPV Tile Conduit
Penetration
PRE-INSTALLATION
☐ Verify module compatibility. See Page 21 for info.
TOOLS REQUIRED
☐ Cordless Drill (non-impact)
☐ Impact Driver (for lag bolts)
☐ Torque Wrench (0-250 in-lbs)
☐ 7/16” Socket
☐ 1/2" Socket
☐ 9/16" Socket
☐ 7/32" Drill bit
☐ 1/8" Drill bit
☐ 1/4" Drill bit
☐ T30 Bit
☐ Channel Lock Pliers
☐ #3 Phillips Bit
☐ Paddle Bit
Ironridge L-Foot
BOSS
Module Grounding
Lug