Flat Roof Attachment Install Manual

Flat Roof Attachment

FRA-01-MAN REV 1.1

WEIGHT: 1.2 LBS

SHEET 1 OF 1

SIZE

SCALE:1:1

DO NOT SCALE DRAWING

FLAT ROOF ATTACHMENT

MEMBRANE VARIES

BY ROOF TYPE

7.0

1.0

ITEM NO.

DESCRIPTION

FLAT ROOF ATTACHMENT, BASE

FLAT ROOF ATTACHMENT, MEMBRANE

WASHER, FLAT 3/8" X 1.25" OD SS

BOLT, 3/8-16 X 1.125" HEX, SS

PAGE 1
Flat Roof Attachment 4 3 2 MEMBRANE VARIES BY ROOF TYPE 1 7.0 1.0 ITEM NO. 1 2 3 4 DESCRIPTION FLAT ROOF ATTACHMENT, BASE FLAT ROOF ATTACHMENT, MEMBRANE WASHER, FLAT 3/8" X 1.25" OD SS BOLT, 3/8-16 X 1.125" HEX, SS © 2019 IronRidge, Inc. All rights reserved. Visit www.ironridge.com or call 1-800-227-9523 for more information. FLAT ROOF ATTACHMENT SIZE A DO NOT SCALE DRAWING SCALE:1:1 WEIGHT: 1.2 LBS SHEET 1 OF 1 FRA-01-MAN REV 1.
PAGE 2
Installation Tools Required: tape measure, chalk, approved sealing materials, roof screws, driver with 9/16” hex socket 1 Mark locations for Flat Roof Attachment. Roof screws can be installed before or after racking is installed. Type, size, and quantity of roof screws to be specified by Structural Engineer. Fastener size not to exceed #15. Screws should be installed symmetrically to each other. 3 Attach rail mounting bracket with washers and 3/8” hardware torqued to 250 in-lbs (21 ft-lbs).