FlashVue Installation Manua

FLASHVUE

FV-01-MAN REV 1.1

12.00

8.00

2.77

3.51

ITEM NO.

DESCRIPTION

FM FLASHING, MILL OR BLACK

GRIP CAP, MILL OR BLACK

LAG & BONDED WASHER,

5/16 X 4.25, 7/16 HEX HEAD

WEIGHT:

SHEET 1 OF 1

SIZE

SCALE:1:4

DO NOT SCALE DRAWING

FLASHVUE

0.6 lbs

THIS EDGE TOWARDS ROOF RIDGE

PAGE 1
FLASHVUE THIS EDGE TOWARDS ROOF RIDGE 12.00 3 2 1 8.00 2.77 3.51 ITEM NO. DESCRIPTION 1 FM FLASHING, MILL OR BLACK 2 GRIP CAP, MILL OR BLACK LAG & BONDED WASHER, 3 5/16 X 4.25, 7/16 HEX HEAD © 2019 IronRidge, Inc. All rights reserved. Visit ww w.ironridge.com or call 1-800-227-9523 for mo re information. FLASHVUE SIZE A SCALE:1:4 DO NOT SCALE DRAWING WEIGHT: 0.6 lbs SHEET 1 OF 1 FV-01-MAN REV 1.
PAGE 2
Installation Tools Requi red: tape measure, chalk, approved sealing materials, driver with 1/4” bit and 7/16” hex socket 2 1 3rd course Rafter 2nd course 1st course Locate rafters and snap vertical and horizontal lines to mark locations of flashings. Drill 1/4” pilot holes, then fill with roofing manufacturer's approved sealant. 3 Press Grip Cap onto flashing in desired orientation for E/W or N/S rails. 5 Torque to 250 in-lbs Attach rails to either side of the open slot using bonding hardware.