FX Rail-Less Installation

FX SYSTEM INSTALLATION MANUAL - 11© 2018 IRONRIDGE, INC. VERSION 1.50
3. INSTALL FIRST ROW OF MOUNT FX
A. SECURE OUTER MOUNTS
Secure two mounts on either end of the rst row to the
ashings with hanger nuts. Position each mount so that the
hanger bolt is centered on the slot. Torque to 132 in-lbs.
B. INSTALL MOUNTS
Attach a string line to the two outermost mounts. Run the
string over the top of the mounts.
Install the middle mounts in the rst row by using the string
line as a reference for alignment and height adjustment.
 Mounts are pre-assembled to the same height, which governs the
height of the module over the roof surface.
A
7/16" socket
132 in-lbs
Hanger bolt
centered
B