FX Rail-Less Installation

FX SYSTEM INSTALLATION MANUAL - 16© 2018 IRONRIDGE, INC. VERSION 1.50
5. INSTALL MODULES
F. INSTALL REMAINING ROWS OF MODULES
Repeat the steps above to install each row until the
desired array is complete.
G. LOCK NORTH EDGE
Once all modules are in place, thread North Bridge Screws
onto each bridge at the north edge of the array until
screws have engaged module frame.
 Screws provide a rigid support and lock the bridges on the north
edge of the array rmly into position.
 North Bridge Screws are only installed on the north edge of the
array.
F
G
6. INSTALL LUG FX
SECURE LUG FX
Replace the spacer on any north edge bridge with Lug FX.
Torque to 60-in-lbs.
 Only one Lug FX is required per continuous array, regardless of
array size.
Remove Spacer
Replace with Lug FX